egghelp/eggheads community

chattr and priority problems

2004-10-01T08:25:03-04:00

I removed the lines just like slennox said. Works fine now. Thanks for all the help!

Best regards
David

Statistics: Posted by sandberg — Fri Oct 01, 2004 8:25 am

chattr and priority problems

2004-09-30T16:13:48-04:00

netbots.tcl does in fact rebind the chattr DCC command to intercept it and allow only owners (or permanent owners if nb_owner is enabled) to add/remove the N flag. However, if nb_flag is set to "b" or "all", the bind that does this is not activated.

sandberg, check that you have removed the section at the bottom of netset.tcl that says "# The following lines remove redundant functions". If you've done that, try shutting down the bot completely, then restart it and see if the problem persists.

Statistics: Posted by slennox — Thu Sep 30, 2004 4:13 pm

chattr and priority problems

2004-09-30T15:54:28-04:00

do a '.binds all' and see if its bind to another flag, or there could be a filt bind overriding it.

Statistics: Posted by greenbear — Thu Sep 30, 2004 3:54 pm

chattr and priority problems

2004-09-30T15:49:12-04:00

The netbots script(s) do nothing regarding (re)binding .chattr. I have used this excellent brainchaild of slennox for 3 years plus without any drama, especially with a core command.

I have used eggdrops for about 2-2½ years. But this is the first time I
use netbots. I havnt had any major problems with eggdrops before, this
is the first time.

Chanlimit.tcl is working fine now, thanks! But the chattr problem remains.

Statistics: Posted by sandberg — Thu Sep 30, 2004 3:49 pm

chattr and priority problems

2004-09-29T17:56:56-04:00

The netbots script(s) do nothing regarding (re)binding .chattr. I have used this excellent brainchaild of slennox for 3 years plus without any drama, especially with a core command.

Statistics: Posted by Alchera — Wed Sep 29, 2004 5:56 pm

chattr and priority problems

2004-09-29T10:36:37-04:00

I updated the "new" version (19 August 2002) of chanlimit.tcl.
Hopefully this one will work better, we'll see later on when it
needs to change the limit. Low activity at the moment.

And now you got mail YooHoo.
I hope you can find some misstakes in the config. Good luck!

Statistics: Posted by sandberg — Wed Sep 29, 2004 10:36 am

chattr and priority problems

2004-09-29T07:28:53-04:00

regarding your persistent problem with chattr, I still don't think that netbots is responsible... more than likely either your egg is defective or you have something in the conf file interfering with eggdrop's core settings. Unless anyone else has any clever fix-it... and you are desperate enough.. you can email me your conf file (pern@adelphia.net) and I will go over it... maybe it's something simple that can be fixed readily maybe not we'll see

as for the set cl_priority variable string, maybe reading what is posted here will clear up your confusion good luck

Statistics: Posted by YooHoo — Wed Sep 29, 2004 7:28 am

chattr and priority problems

2004-09-29T06:51:05-04:00

first, what makes you think that netbots is responsible for the crossed wires in your chattr? Did you restart the bot sans netbots only, or did you comment out all those third party scripts you were loading as well? I question whether you truly investigated the source of the error and discovered netbots to be responsible... I strongly suspect one of those extra scripts you are loading will be the culprit...

I only comment out the netbots.tcl, because it was the only script I had on the bot. So yes, it better be it?

second, regarding set cl_priority, I ask once again how you come to the conclusion that this variable doesn't work... sure seems to work fine over here.

Should I use diffrent timers on the bots when they should react? Doesn't look so nice when everyone sets the limit at the same time. The same thing with flood-join and such things, they all inform the channel about that someone is flood-joining. Should I only config so one bot handels that?

Statistics: Posted by sandberg — Wed Sep 29, 2004 6:51 am

chattr and priority problems

2004-09-28T04:53:00-04:00

first, what makes you think that netbots is responsible for the crossed wires in your chattr? Did you restart the bot sans netbots only, or did you comment out all those third party scripts you were loading as well? I question whether you truly investigated the source of the error and discovered netbots to be responsible... I strongly suspect one of those extra scripts you are loading will be the culprit...

second, regarding set cl_priority, I ask once again how you come to the conclusion that this variable doesn't work... sure seems to work fine over here.

Statistics: Posted by YooHoo — Tue Sep 28, 2004 4:53 am

chattr and priority problems

2004-09-26T06:15:19-04:00

Hi.. I got two problems with the netbots.

First: ( http://forum.egghelp.org/viewtopic.php?t=8320 )
When I load the script to the bot I can't chattr the other users.
But if I disable it, its possible. So something got to be wrong in
my config. Can't figure out what it is.

Second:
My other problem is that the 'set cl_priority' doesn't seem to work
for me (chanlimit.tcl). Insted I get:

-!- mode/#GlassBil [+l 33] by Stacie, Minogue0, Aguilera, Minogue, Spears

This is the activated parts of my config:

Code:

# netbots.tcl settingsset nb_flag allset nb_key "not public =)"set nb_defctrl "*"set nb_owner 0set nb_ctrlbots ""set nb_max 5set nb_timeout 180set nb_netupdate 2set nb_nettcl 0set nb_update "GlassBil"set nb_chon 1set nb_broadcast ""set nb_cmdcast 0set nb_castfilter "addhost ident .chpass .newpass .note"set nb_servers { irc.inet.tele.dk irc.dkom.at efnet.cs.hut.fi ...And then alot more servers... }# botnetop.tcl settingsset nb_component(botnetop) 1set bop_delay 2set bop_maxreq 0set bop_modeop 0set bop_linkop 1set bop_icheck 0set bop_hcheck 1set bop_osync 0set bop_addhost 0set bop_log 2# chanlimit.tcl settingsset nb_component(chanlimit) 1set cl_chans "#GlassBil"set cl_priority "Christina Dannii Kylie Stacie Britney"set cl_echans "#VVR"set cl_limit 5set cl_grace 2set cl_timer 1set cl_server 1set cl_log 1# extras.tcl settingsset nb_component(extras) 1set ex_cleanup 0set ex_clearbans 0set ex_newuser "GlassBil"set ex_opall 1# mass.tcl settingsset nb_component(mass) 1set ma_reason "closing temporarily"# sentinel.tcl settingsset nb_component(sentinel) 1set sl_bcflood 5:5set sl_bmflood 5:5set sl_ccflood 5:3set sl_avflood 5:3set sl_tsunami 10set sl_txflood 20:10set sl_boflood 4:20set sl_jflood 4:20set sl_nkflood 6:20set sl_ban 30set sl_boban 30set sl_globalban 0set sl_wideban 1set sl_banmax 100set sl_igtime 240set sl_masktype 2set sl_ilocktime 60set sl_mlocktime 60set sl_shortlock 1set sl_bfmaxbans 0set sl_note "GlassBil"set sl_cfnotice "Channel locked temporarily due to flood, sorry for any inconvenience this may cause :-)"set sl_bfnotice "Channel locked temporarily due to full ban list, sorry for any inconvenience this may cause :-)"set sl_lockcmds 2set sl_lockflags "o"set sl_bxsimul 0

Hope you can help me figure out whats wrong.

Best regards
David

Statistics: Posted by sandberg — Sun Sep 26, 2004 6:15 am