egghelp/eggheads community

Invite enforcement issue

2004-08-29T16:22:06-04:00

my sugestion is that you /dcc chat botnick and type .chanset #channel +i, that will set +i on that chan and noone except u could remove it.

Statistics: Posted by esix — Sun Aug 29, 2004 4:22 pm

Invite enforcement issue

2004-08-29T12:57:34-04:00

whats a DCC (partyline)? is that just mIRC? thx

DCC Chat and telnet are explained here...
If I can suggest something, it would greatly help your understanding if you visted this sites' homepage, and click each of the highly useful links that are found on the left hand side of your screen. If you were to read these, it would surely bring you up to speed.

Statistics: Posted by YooHoo — Sun Aug 29, 2004 12:57 pm

Invite enforcement issue

2004-08-29T11:11:17-04:00

In DCC (aka partyline) with the bot try:
Code:
.chanset #genesisweb chanmode +tn-isml
If this doesn't give a result then that is really akward.
What IRCd type are you using? btw.

I'm using the efnet code running on my own linux server.

I tried that in mirc but i get the error that you cannot do this in the status window.

If i try and enter chanset i get the user cannot be found error.

Also, i'm a serious n00b at this, whats a DCC (partyline)? is that just mIRC?

thx

Statistics: Posted by Guest — Sun Aug 29, 2004 11:11 am

Invite enforcement issue

2004-08-24T22:22:00-04:00

Going into a channel with the bot already there results in the bot changing it into Invite only (and some others)
A few seconds after someone entering the room, it says:

mode: (Genesis-2) sets (+isml 1)

As before, I have no idea whats making it do this!

Hiya Sc00bert!
Your bot has been set to enforce the channel mode +l 1 {chan-limit 1}. Since the bot is viewing the channel as "full", it locks the channel using modes +ism {invite, secret, moderated} to prevent flooding of your channel. For more information --->irc channel modes.The eggdrop command that controls all channel settings is called chanset. This, and every other basic DCC command, have built-in help menus that explain all this in much greater detail. Type .help chaninfo, or read the informative channel command reference that Slennox has graciously provided for your egg-ertainment The DCC/telnet command that should have been entered:
.chanset #genesisweb chanmode +nt-isml, followed by .chansave #genesisweb to make sure it sticks

Code:

# Do you want to enable invites (+I modes)? set use-invites 0

I'm not sure what server your bot is connected to, but unless it's Efnet or other +I compatible network, the use-invites variable has no effect nor value.

Code:

proc evnt:init_server {type} {   global botnick   putquick "MODE $botnick -iw" }

This is what your bot will do when it first connects to a server successfully. The mode "i" refered to here is a personal mode (invisible), and has nothing to do with channel modes. This procedure is also a convenient place to make the bot identify to your network's NICKSERV, if any. Hope this helps

Statistics: Posted by YooHoo — Tue Aug 24, 2004 10:22 pm

Invite enforcement issue

2004-08-24T22:01:28-04:00

In DCC (aka partyline) with the bot try:

Code:

.chanset #genesisweb chanmode +tn-isml

If this doesn't give a result then that is really akward.
What IRCd type are you using? btw.

Statistics: Posted by awyeah — Tue Aug 24, 2004 10:01 pm

Invite enforcement issue

2004-08-24T16:24:36-04:00

thanks for the replys

still having the problem

Going into a channel with the bot already there results in the bot changing it into Invite only (and some others)

A few seconds after someone entering the room, it says:

mode: (Genesis-2) sets (+isml 1)

As before, I have no idea whats making it do this!

I have changed the below code

Code:

channel add #genesisweb {      chanmode "+nt-i"      idle-kick 1

and also set

Code:

# Do you want to enable invites (+I modes)?set use-invites 0

and

Code:

proc evnt:init_server {type} {  global botnick  putquick "MODE $botnick -iw"}

and also disabled the .tcl scripts at the end to see if that does anything. but nope

Its still setting the room to invite only.

why???????????

Cheers
Sc00by

Statistics: Posted by Guest — Tue Aug 24, 2004 4:24 pm

Invite enforcement issue

2004-08-23T14:04:06-04:00

I don't have telnet access to the bot and I have no idea what you mean by .chanset #chan chanmode -i

YooHoo's Helpful Tip Of The Day
1) Enter into a DCC CHAT or telnet session with your bot; i.e. /CTCP $botnick CHAT
2) Type .help all.
3) Read. Read. Read.

Statistics: Posted by YooHoo — Mon Aug 23, 2004 2:04 pm

Invite enforcement issue

2004-08-22T18:30:39-04:00

This is how it's set in configuration. Notice no space in the mode settings?

Code:

channel add #genesisweb {      chanmode "+nt-i"      idle-kick 1

I have no idea what you mean by .chanset #chan chanmode -i

The command console! DCC Chat (aka Partyline).

If you cannot DCC Chat with the bot then you'll have to kill the bot, delete both *.chan & *.chan~bak from the shell, upload corrected configuration file and then restart the bot.

Statistics: Posted by Alchera — Sun Aug 22, 2004 6:30 pm

Invite enforcement issue

2004-08-22T12:58:45-04:00

ok, i have the same problem but a bit confused.

Problem being that as soon as someone goes into a channel the bot changes it to +i

If they come out they can't get back in as its now invite only.

I have this in the conf file:

Code:

channel add #genesisweb {     chanmode "+nt -i"     idle-kick 1

but this does nothing.

I don't have telnet access to the bot and I have no idea what you mean by .chanset #chan chanmode -i

Any ideas?
Thanks

Statistics: Posted by Guest — Sun Aug 22, 2004 12:58 pm

Invite enforcement issue

2004-08-14T10:40:26-04:00

Via DCC

Code:

.chanset #chan chanmode -i

In configuration file:

Code:

channel add #channel {             chanmode "+/-modes"

Statistics: Posted by Alchera — Sat Aug 14, 2004 10:40 am

Invite enforcement issue

2004-08-14T08:04:08-04:00

Ive had this issue in allthe time ive used eggdrop1.6.16; the bot, once connnected to the server and begins to join rooms will set +i. I have to manually set -i and that gets very tiresome.

For use with sentinel the bot must not be set enforcing -i.

So how can i stop the bot settin +i when it joins a channel without havin to enforce -i in the chanset to get the bot to take invite off- as this conflicts with sentinel.

Kx

Statistics: Posted by Kx — Sat Aug 14, 2004 8:04 am