egghelp/eggheads community

Compiling error

2004-06-12T17:06:20-04:00

Hey.. more info would be very helpful... Did previous Eggdrop versions compile on this box?

Could you e-mail me (wcc@eggheads.org) config.h and config.log (after running ./configure), and the output from ./configure and make?

Thanks,
Wcc

Statistics: Posted by Wcc — Sat Jun 12, 2004 5:06 pm

Compiling Errors

2004-06-12T03:43:11-04:00

I've been trying to get eggdrop1.6.16 up and running on a shell, i get to do the "./configure" , then i get to do the "make config" , then when i do "make" it starts running and then i get the following at the end :

---------- Yeah! That's the compiling, now the linking! ----------

Linking eggdrop: (standard build).

gcc -pipe -o ../eggdrop bg.o botcmd.o botmsg.o botnet.o chanprog.o cmds.o dcc.o dccutil.o dns.o flags.o language.o match.o main.o mem.o misc.o misc_file.o modules.o net.o rfc1459.o tcl.o tcldcc.o tclhash.o tclmisc.o tcluser.o userent.o userrec.o users.o -L/usr/local/lib -ltcl -lm -ldl md5/md5c.o compat/*.o `cat mod/mod.xlibs`
dns.o: In function `block_dns_ipbyhost':
/home/black/eggdrop1.6.16/src/dns.c:474: undefined reference to `__inet_aton'
dns.o: In function `tcl_dnslookup':
/home/black/eggdrop1.6.16/src/dns.c:533: undefined reference to `__inet_aton'
modules.o: In function `module_load':
/home/black/eggdrop1.6.16/src/modules.c:729: undefined reference to `__inet_aton'
net.o: In function `getmyip':
/home/black/eggdrop1.6.16/src/net.c:109: undefined reference to `__inet_addr'
net.o: In function `proxy_connect':
/home/black/eggdrop1.6.16/src/net.c:321: undefined reference to `__inet_addr'
net.o: In function `open_telnet_raw':
/home/black/eggdrop1.6.16/src/net.c:395: undefined reference to `__inet_addr'
net.o: In function `iptostr':
/home/black/eggdrop1.6.16/src/net.c:528: undefined reference to `__inet_ntoa'
collect2: ld returned 1 exit status
make[1]: *** [../eggdrop] Error 1
make[1]: Leaving directory `/home/black/eggdrop1.6.16/src'
make: *** [modegg] Error 2

The shell is on Slackware,
OS: Linux 2.4.26
Tcl library: /usr/local/lib/tcl8.3
Tcl version: 8.3.4 (header version 8.3.4)

Any help would be appreciated

Statistics: Posted by Guest — Sat Jun 12, 2004 3:43 am

Compiling error

2004-06-10T14:13:17-04:00

Had the same problem (http://forum.egghelp.org/viewtopic.php?p=37175), updating tcl from 8.0 to 8.3 fixed it, thanks!

Statistics: Posted by Guest — Thu Jun 10, 2004 2:13 pm

Compiling error

2004-06-06T13:05:04-04:00

i can affirme that adding that small line solved it totally

Statistics: Posted by puffi — Sun Jun 06, 2004 1:05 pm

Compiling error

2004-06-06T04:16:37-04:00

So instead of posting that you get the problem too, apply the solution already given in the thread....

Statistics: Posted by strikelight — Sun Jun 06, 2004 4:16 am

Compiling error

2004-06-06T02:38:10-04:00

Ah, same to me.. I got this problem too..

gcc -pipe -g -O2 -I.. -I.. -DHAVE_CONFIG_H -c ./botmsg.c
./botmsg.c: In function `tandout_but':
./botmsg.c:50: syntax error before `va'
./botmsg.c:52: `va' undeclared (first use in this function)
./botmsg.c:52: (Each undeclared identifier is reported only once
./botmsg.c:52: for each function it appears in.)
./botmsg.c:53: syntax error before `char'
./botmsg.c: In function `simple_sprintf':
./botmsg.c:144: syntax error before `va'
./botmsg.c:146: `va' undeclared (first use in this function)
./botmsg.c:147: syntax error before `char'
./botmsg.c:154: syntax error before `char'
./botmsg.c:159: syntax error before `int'
./botmsg.c:164: syntax error before `int'
./botmsg.c:169: syntax error before `unsigned'
./botmsg.c:177: syntax error before `int'
./botmsg.c: In function `botnet_send_priv':
./botmsg.c:297: syntax error before `va'
./botmsg.c:299: `va' undeclared (first use in this function)
./botmsg.c:300: syntax error before `char'
./botmsg.c:301: syntax error before `char'
./botmsg.c:302: syntax error before `char'
./botmsg.c:303: syntax error before `char'
*** Error code 1

Statistics: Posted by blood_x — Sun Jun 06, 2004 2:38 am

Compiling error

2004-06-05T09:24:37-04:00

Big thanks, that config.h-Line solved my problem

thank you for your effort!

Statistics: Posted by puffi — Sat Jun 05, 2004 9:24 am

Compiling error

2004-06-04T10:38:23-04:00

Ok, thanks to both of you guys

Both of these issues have been resolved in 1.6.17 CVS. 1.6.17 will be out fairly soon, but, in the mean time..

------

Code:

...botmsg.c: In function `tandout_but':botmsg.c:50: `va_list' undeclared (first use in this function)botmsg.c:50: (Each undeclared identifier is reported only oncebotmsg.c:50: for each function it appears in.)botmsg.c:50: parse error before "va" ...

To fix the first bug (the botcmd.c / va_* stuff), you can upgrade to Tcl 8.3 or 8.4 (see doc/COMPILE-GUIDE). If you do not which to do this, a simpler solution is to add the following line to the very end of config.h (AFTER running ./configure):

Code:

#define HAVE_STDARG_H 1

------

Code:

net.c: In function `open_address_listen':net.c:446: `socklen_t' undeclared (first use in this function)net.c:446: (Each undeclared identifier is reported only oncenet.c:446: for each function it appears in.)net.c:446: parse error before `addrlen'net.c:469: `addrlen' undeclared (first use in this function)net.c: In function `answer':net.c:539: `socklen_t' undeclared (first use in this function)net.c:539: parse error before `addrlen'net.c:542: `addrlen' undeclared (first use in this function)make[1]: *** [net.o] Error 1

To fix the second bug (ONLY DO THIS IF YOU ACTUALLY GET THIS ERROR):

Add the following line to src/eggdrop.h, directly after

Code:

#ifndef _EGG_EGGDROP_H#define _EGG_EGGDROP_H

near the top of the file:

Code:

typedef int socklen_t;

------

These problems only seem to happen on a few systems (which is why these bugs weren't discovered).

Thanks again guys,
Wcc

Statistics: Posted by Wcc — Fri Jun 04, 2004 10:38 am

Compiling error

2004-06-04T02:33:42-04:00

MaxPower, could you e-mail me your config.h, config.log, and the output from ./configure? (wcc@eggheads.org) And is that with or without that patch above applied?

Wcc

Statistics: Posted by Wcc — Fri Jun 04, 2004 2:33 am

another compil error 1.6.16

2004-06-04T02:47:12-04:00

make[1]: Entering directory `/home/*******/eggdrop1.6.16/src'
This may take a while. Go get some runts.

gcc -pipe -g -O2 -Wall -I.. -I.. -DHAVE_CONFIG_H -c net.c
net.c: In function `open_address_listen':
net.c:446: `socklen_t' undeclared (first use in this function)
net.c:446: (Each undeclared identifier is reported only once
net.c:446: for each function it appears in.)
net.c:446: parse error before `addrlen'
net.c:469: `addrlen' undeclared (first use in this function)
net.c: In function `answer':
net.c:539: `socklen_t' undeclared (first use in this function)
net.c:539: parse error before `addrlen'
net.c:542: `addrlen' undeclared (first use in this function)
make[1]: *** [net.o] Error 1

no errors up until now
make[1]: Leaving directory `/home/******/eggdrop1.6.16/src'
make: *** [modegg] Error 2

Statistics: Posted by Guest — Fri Jun 04, 2004 2:18 am

Compiling error

2004-06-03T05:38:17-04:00

What OS is the box running that it failed on? I saw one other person experiance this error....

Try this patch:

Code:

patch -p0 < filename.patch./configuremake configmake

Code:

Index: aclocal.m4===================================================================RCS file: /usr/local/cvsroot/eggdrop1.6/aclocal.m4,vretrieving revision 1.87diff -u -r1.87 aclocal.m4--- aclocal.m410 Apr 2004 04:53:41 -00001.87+++ aclocal.m43 Jun 2004 08:53:29 -0000@@ -94,7 +94,7 @@ c EOF -  for ac_prog in 'head -1' 'head -n 1' 'sed 1q'; do+  for ac_prog in 'head -n 1' 'head -1' 'sed 1q'; do     AC_MSG_CHECKING([whether $ac_prog works])     AC_CACHE_VAL([ac_cv_prog_HEAD_1],     [Index: configure===================================================================RCS file: /usr/local/cvsroot/eggdrop1.6/configure,vretrieving revision 1.117diff -u -r1.117 configure--- configure2 Jun 2004 06:58:58 -00001.117+++ configure3 Jun 2004 08:53:30 -0000@@ -1,5 +1,5 @@ #! /bin/sh-# From configure.ac Revision: 1.5 .+# From configure.ac Revision: 1.6 . # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.59 for Eggdrop 1.6.17. #@@ -3403,7 +3403,7 @@ c EOF -  for ac_prog in 'head -1' 'head -n 1' 'sed 1q'; do+  for ac_prog in 'head -n 1' 'head -1' 'sed 1q'; do     echo "$as_me:$LINENO: checking whether $ac_prog works" >&5 echo $ECHO_N "checking whether $ac_prog works... $ECHO_C" >&6     if test "${ac_cv_prog_HEAD_1+set}" = set; then@@ -5313,7 +5313,9 @@   -for ac_header in arpa/inet.h fcntl.h limits.h locale.h netdb.h netinet/in.h stddef.h sys/file.h sys/param.h sys/rusage.h sys/select.h sys/socket.h sys/time.h unistd.h wchar.h+++for ac_header in arpa/inet.h fcntl.h limits.h locale.h netdb.h netinet/in.h stdarg.h std_args.h stddef.h sys/file.h sys/param.h sys/rusage.h sys/select.h sys/socket.h sys/time.h unistd.h wchar.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; thenIndex: configure.ac===================================================================RCS file: /usr/local/cvsroot/eggdrop1.6/configure.ac,vretrieving revision 1.6diff -u -r1.6 configure.ac--- configure.ac2 Jun 2004 06:58:58 -00001.6+++ configure.ac3 Jun 2004 08:53:30 -0000@@ -47,7 +47,7 @@ # Checks for header files EGG_HEADER_STDC AC_HEADER_DIRENT-AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h locale.h netdb.h netinet/in.h stddef.h sys/file.h sys/param.h sys/rusage.h sys/select.h sys/socket.h sys/time.h unistd.h wchar.h])+AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h locale.h netdb.h netinet/in.h stdarg.h std_args.h stddef.h sys/file.h sys/param.h sys/rusage.h sys/select.h sys/socket.h sys/time.h unistd.h wchar.h]) AC_HEADER_TIME  # Checks for typedefs, structures, and compiler characteristics

Wcc

Statistics: Posted by Wcc — Thu Jun 03, 2004 5:38 am

Compiling error

2004-06-02T02:33:46-04:00

That's what i did and that's what results the lines i posted above
I just said that ``make static'' too brings up an error

Statistics: Posted by puffi — Wed Jun 02, 2004 2:33 am

Compiling error

2004-06-02T02:25:31-04:00

Try only make without make static....

Statistics: Posted by ]Kami[ — Wed Jun 02, 2004 2:25 am

Compiling error

2004-06-02T01:43:38-04:00

No nothing. When i try to compile it static with ``make static'' then a more or less equal error comes up, not the same message, but it doesnt compile anyway
It is very weird, cause on other machines, running Debian Woodie with kernel 2.4.26 it compiled right away..its only on this one machine (to wich i have no root-access)

Statistics: Posted by puffi — Wed Jun 02, 2004 1:43 am

Compiling error

2004-06-01T15:53:10-04:00

Any error appear in any of the following steps before you got to the 'make'?

tar zxvf eggdrop1.6.16.tar.gz
cd eggdrop1.6.16
./configure
make config

Statistics: Posted by Alchera — Tue Jun 01, 2004 3:53 pm