egghelp/eggheads community

just stopped back in to say it's all working

2003-04-09T01:35:17-04:00

i just wanted to stop back in to say it's all working and to thank everyone for helping me out all 4 bots are linked and the netbot stuff is working on all 4 of them again

thanks so much guys u have been a big help : )

SnOoP

Statistics: Posted by SnOoPDoGg187 — Wed Apr 09, 2003 1:35 am

k sorry guys 1 more question

2003-04-09T01:00:03-04:00

ok i found out that everything is behind the nat firewall and the ip is in the range that it says in the config file so i should use that as the nat ip in the config file and do not use set my-ip or set my-hostname correct?

thanks again for all the help

Statistics: Posted by SnOoPDoGg187 — Wed Apr 09, 2003 1:00 am

thanks man

2003-04-08T11:53:12-04:00

thanks for all the help you have given me tonight lol now i can get them linked and running again u have been a big big help man thanks alot

thanks

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 11:53 am

need help with linking bots and nat firewall

2003-04-08T11:36:48-04:00

If it is a router, then depending on what settings can be applied, I would reduce the port range you have available. So long as you have enough (5 should be plenty normaly).

Change the settings, then you will have to wait until you can get a admin to change the router setting.

Speak to the admin regarding forwarded ports.

Statistics: Posted by ppslim — Tue Apr 08, 2003 11:36 am

k thanks for all the help u have given me

2003-04-08T11:08:39-04:00

thanks for all the time help u have given me i reall appreciate it man

would it be k to have him set it to forward the 4 ports that are allready set
on the bots? there in the 3000-5000 range or should i chaneg them then have him forward them?

thanks again this is the last time i bug ya i swear : )

thanks alot for all the help ya given me man

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 11:08 am

need help with linking bots and nat firewall

2003-04-08T10:04:50-04:00

You should use the 68.185.79.10 IP for linking.

However, this sounds liek this is a router. The router will need to have the port you wish to use forwarded - you should see the admin for this.

Statistics: Posted by ppslim — Tue Apr 08, 2003 10:04 am

this should be the last time i bug ya

2003-04-08T09:39:41-04:00

k i got the ip and it's not in any of the ranges it says in the config file under nat firewall the ip is 68.185.79.10 so that is the nat ip right i did what u said in

step 2 Simply connect to IRC via BitchX, or using the eggdrop with both setting blanked out. Look at the "/whois" for the client and use the IP (resolve a hostname if needed) from this for the NAT setting

i started the bot up with all the settings disabled nat-ip set my-ip set my-hostname commented out i did /whois then dns that and got the ip above

my question is what should i put for the address when using chadd botnick ip:port?

i changed 2 of them allready going to put the nat ip in for the other 2 now

thanks

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 9:39 am

need help with linking bots and nat firewall

2003-04-08T09:07:09-04:00

That means wget can't open the filename for writting.

This is either some form of limitation ont he system, or you are in the wrong directory when you type it.

Statistics: Posted by ppslim — Tue Apr 08, 2003 9:07 am

i did it agin but same thing

2003-04-08T09:03:52-04:00

wget http://www.ppslim.ukshells.co.uk/prov/egghelp/getip.php
--06:05:41-- http://www.ppslim.ukshells.co.uk/prov/egghelp/getip.php
=> `getip.php'
Resolving www.ppslim.ukshells.co.uk... done.
Connecting to www.ppslim.ukshells.co.uk[217.10.142.172]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
getip.php: Permission denied

Cannot write to `getip.php' (Permission denied).

sorry i can't type get says file or dir doesn't exist or something like that so i tried wget and it gives me that error above?

thanks

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 9:03 am

need help with linking bots and nat firewall

2003-04-08T08:57:32-04:00

Check the command you are tying.

It looks like you are typing things wrong.

Statistics: Posted by ppslim — Tue Apr 08, 2003 8:57 am

permission denied

2003-04-08T08:40:30-04:00

i finally figured it out lol but when it tries to download the file i get this

bash: --05:41:41--: command not found
snoop@jedi-linux:/$ => `getip.php'
> Resolving www.ppslim.ukshells.co.uk... done.
> Connecting to www.ppslim.ukshells.co.uk[217.10.142.172]:80... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: unspecified [text/plain]
> getip.php: Permission denied

any idea how to fix this?

thanks

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 8:40 am

Re: thanks that's were it was this is what i got when i ran

2003-04-08T07:26:56-04:00

eth0 Link encap:Ethernet HWaddr 00:E0:4C:39:12:B8
inet addr:10.0.1.5 Bcast:10.0.255.255 Mask:255.255.0.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:23447814 errors:0 dropped:0 overruns:0 frame:0
TX packets:12123239 errors:0 dropped:0 overruns:5 carrier:0
collisions:0 txqueuelen:100
RX bytes:4107716597 (3917.4 Mb) TX bytes:1359329540 (1296.3 Mb)
Interrupt:11 Base address:0x7000

This is within the range talked about in the NAT section.

You should leave both the my-ip and nat-ip settings blank (preferably place a # at the front of the line).

The bot should start fine. Once on IRC, follow the steps I gave above to obtain the IP from a whois request. This value should be placed in the nat-ip setting.

If you can't get the bot to start this way, do the following.

1: Login to the shell
2: Type "get http://www.ppslim.ukshells.co.uk/prov/egghelp/getip.php"
3: Type "cat getip.php"

The IP listed is what my web-site sees you as. This may contain a transparrent proxy address, but not normaly (they use there own variable).

Use this IP in the nat-ip setting.

Statistics: Posted by ppslim — Tue Apr 08, 2003 7:26 am

thanks that's were it was this is what i got when i ran it

2003-04-08T06:41:28-04:00

eth0 Link encap:Ethernet HWaddr 00:E0:4C:39:12:B8
inet addr:10.0.1.5 Bcast:10.0.255.255 Mask:255.255.0.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:23447814 errors:0 dropped:0 overruns:0 frame:0
TX packets:12123239 errors:0 dropped:0 overruns:5 carrier:0
collisions:0 txqueuelen:100
RX bytes:4107716597 (3917.4 Mb) TX bytes:1359329540 (1296.3 Mb)
Interrupt:11 Base address:0x7000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:110731 errors:0 dropped:0 overruns:0 frame:0
TX packets:110731 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200714915 (191.4 Mb) TX bytes:200714915 (191.4 Mb)

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 6:41 am

thanks

2003-04-08T06:32:50-04:00

thanks caesar i'm gonna try it right now

thanks again man

Statistics: Posted by SnOoPDoGg187 — Tue Apr 08, 2003 6:32 am

need help with linking bots and nat firewall

2003-04-08T06:25:06-04:00

Try an /sbin/ifconfig

Statistics: Posted by caesar — Tue Apr 08, 2003 6:25 am