egghelp/eggheads community

Error flushing

2018-09-12T08:56:27-04:00

That's not an error, it's the putlog "Earthquake error: $error" line I previously told you to add to see what was stored in $error variable.

Hahahah, ok that makes sense. One last time, thank you!

Statistics: Posted by a_aa — Wed Sep 12, 2018 8:56 am

Error flushing

2018-09-12T00:45:55-04:00

That's not an error, it's the putlog "Earthquake error: $error" line I previously told you to add to see what was stored in $error variable.

Statistics: Posted by caesar — Wed Sep 12, 2018 12:45 am

Get the New Earthquake Announcer v1.3

2018-09-11T21:46:10-04:00

Posted the entire patched script @ http://forum.egghelp.org/viewtopic.php?t=20350

Merky & a_aa: Please get the new script (version 1.3) from the above link and report back here.
I can Not recreate either of your current errors from here.

Statistics: Posted by SpiKe^^ — Tue Sep 11, 2018 9:46 pm

Error flushing

2018-09-11T21:43:40-04:00

One small thing, not sure it matters since the script is working but every time the script is called, !EQ, i get an incremental error reported in the partyline.

[18:33:51] Earthquake error: ::http::108
[18:40:59] Earthquake error: ::http::109
[18:41:18] Earthquake error: ::http::110

The number goes up by 1 each time. Ideas?

Statistics: Posted by a_aa — Tue Sep 11, 2018 9:43 pm

Error flushing

2018-09-11T20:21:08-04:00

I said:
Code:
::http::register https 443 tls:socket 
notice the lack of :'s, it's not a mistake but it's done on purpose to use this new function instead.

My bad, sorry I did not look close enough. Thanks for all the help!

Statistics: Posted by a_aa — Tue Sep 11, 2018 8:21 pm

Error flushing

2018-09-11T20:14:10-04:00

I also added the eqnews to the line you posted and the scipt is again working.

Caesar and SpiKe^^, thanks a million, it is greatly appreciate!

Statistics: Posted by a_aa — Tue Sep 11, 2018 8:14 pm

Error flushing

2018-09-11T14:46:21-04:00

after add proc tls:socket args i get this error

Code:

[01:43:01] Tcl error [::eqnews::magic_]: can't read "::eqnews::ary(events)": no such element in array[01:44:01] Tcl error [::eqnews::magic_]: can't read "::eqnews::ary(events)": no such element in array

Statistics: Posted by Merky — Tue Sep 11, 2018 2:46 pm

Error flushing

2018-09-11T12:11:40-04:00

Your welcome.

Statistics: Posted by caesar — Tue Sep 11, 2018 12:11 pm

Error flushing

2018-09-11T08:40:11-04:00

Caesar: Thank You Very Much for the Help:)

I loaded the script and applied the patches you suggested.
That changed the error to:

Invalid command name "tls:socket" ( https://earthquake.usgs.gov/earthquakes ... 5_day.atom )

I changed the line you posted to:

Code:

::http::register https 443 ::eqnews::tls:socket

And now the script works as expected.
Good Job Caesar!

I will try to update the script on the forum and archive.

Statistics: Posted by SpiKe^^ — Tue Sep 11, 2018 8:40 am

Error flushing

2018-09-11T00:59:58-04:00

I said:

Code:

::http::register https 443 tls:socket

notice the lack of :'s, it's not a mistake but it's done on purpose to use this new function instead.

Statistics: Posted by caesar — Tue Sep 11, 2018 12:59 am

Error flushing

2018-09-10T20:06:42-04:00

Hey Caesar,

I tried the edits that you posted and I still get the error. I tried all 3 options that were on the link provided to the TCL page and still no luck.

I'm not sure if it matters where the the code is put but here is mine. I placed it before the catch statement.

Code:

  # Sept 10 added the following   proc tls:socket args {       set opts [lrange $args 0 end-2]       set host [lindex $args end-1]       set port [lindex $args end]        ::tls::socket -servername $host {*}$opts $host $port      # ::tls::socket -ssl3 false -ssl2 false -tls1 true -servername $host {*}$opts $host $port     # ::tls::socket -ssl3 false -ssl2 false -tls1 true -tls1.2 false -tls1.1 false \     # -servername $host {*}$opts $host $port               }

Code:

      # ::http::register https 443 [list ::tls::socket -tls1 1]  ;# added: plat_ #       ::http::register https 443 ::tls::socket

This is my status report from telnet and then running !eq

Admin: evilbot testbot@testbotnet.org>
Config file: testbot
OS: Linux 4.17.17-x86_64-linode116
Process ID: 22819 (parent 1)
Tcl library: /usr/share/tcltk/tcl8.6
Tcl version: 8.6.5 (header version 8.6.5)
Tcl is threaded.
TLS support is enabled.
TLS library: OpenSSL 1.0.2g 1 Mar 2016
IPv6 support is enabled.
Socket table: 20/100
Loaded module information:
Channels: #test (need ops)
Online as: testbot!testbot@Clk-E646DB59.org (Test Bot)
Server [irc.---------.ca]:+6669 (connected for 00:02)
#test : 2 members, enforcing "+tn" (greet)

And finally the error after I edited the script and do a rehash.

[17:05:51] #aa# rehash
Rehashing.
[17:05:51] Writing user file...
[17:05:51] Writing channel file...
[17:05:51] Rehashing ...
[17:05:51] Writing channel file...
[17:05:51] Listening at telnet port 8000 (all).
[17:05:51] Loading dccwhois.tcl...
[17:05:51] Loaded dccwhois.tcl
[17:05:51] m00nie::weather 2.6 loaded
[17:05:51] bseen1.4.2c: -- Bass's SEEN loaded --
[17:05:51] Earthquake Announcer v1.2 loaded.
[17:05:51] m00nie::news 1.0 loaded
[17:05:51] Userinfo TCL v1.07 loaded (URL BF GF IRL EMAIL DOB PHONE ICQ).
[17:05:51] use '.help userinfo' for commands.
[17:05:51] Writing channel file...
[17:05:51] Userfile loaded, unpacking...
[17:05:56] Earthquake error: error flushing "sock154d510": connection reset by peer

Thanks again for trying.

Statistics: Posted by a_aa — Mon Sep 10, 2018 8:06 pm

Error flushing

2018-09-10T04:41:19-04:00

I tried various things to no avail, and then tried this code:

Code:

proc tls:socket args {set opts [lrange $args 0 end-2]set host [lindex $args end-1]set port [lindex $args end]::tls::socket -servername $host {*}$opts $host $port}

taken from here.

Add this to your code and change the:

Code:

::http::register https 443 [list ::tls::socket -tls1 1]  ;# added: plat_ #

or whatever you got there now to:

Code:

::http::register https 443 tls:socket

and it will work just fine.

Statistics: Posted by caesar — Mon Sep 10, 2018 4:41 am

Error flushing

2018-09-09T09:48:45-04:00

So you see a blank space like "Earthquake error:" ?

Edit....
I just edited my console to show messages in the partyline, I now get this when typing the trigger. Since the script calls to check every 5 minutes, I am getting the error sent to the partyline at 5 minute intervals, so I know the script is running, just getting the error.

[07:25:00] Earthquake error: error flushing "sock18d3e50": connection reset by peer

BTW all my other scripts work, ie weather, news etc. Channel #test is set +earthquake. When script used to run it ran in #satellite but is temporarily disabled.

Quick edit, here is a status from telnet session.

Config file: evilbot
OS: Linux 4.17.17-x86_64-linode116
Process ID: 16134 (parent 1)
Tcl library: /usr/share/tcltk/tcl8.6
Tcl version: 8.6.5 (header version 8.6.5)
Tcl is threaded.
TLS support is enabled.
TLS library: OpenSSL 1.0.2g 1 Mar 2016
IPv6 support is enabled.
Socket table: 20/100
Loaded module information:
Channels: #satellite (need ops), #pool (need ops), #test
Online as: evilbot!evilbot@Clk------------.org (Evil Bot)
Server [irc.---------.ca]:+6669 (connected for 00:24)
#satellite : 17 members, enforcing "+tn" (greet)
#pool : 16 members, enforcing "+tn" (greet)
#test : 2 members, enforcing "+tn" (greet)

Thanks

Statistics: Posted by a_aa — Sun Sep 09, 2018 9:48 am

Error flushing

2018-09-09T04:03:42-04:00

So you see a blank space like "Earthquake error:" ?

Statistics: Posted by caesar — Sun Sep 09, 2018 4:03 am

Error flushing

2018-09-08T19:18:36-04:00

I added the line as follows,

catch { set t [::http::geturl $::eqnews::ary(page) -timeout 30000] } error
putlog "Earthquake error: $error"

but no reporting back when I am in telnet with the bot? I can't dcc directly from channel but have no problems to telnet in.

Statistics: Posted by a_aa — Sat Sep 08, 2018 7:18 pm