Code:

http::register https 443 tls::socket

Code:

http::register https 443 {tls::socket -tls1 1}

Code:

# http.tcl --##Client-side HTTP for GET, POST, and HEAD commands. These routines can#be used in untrusted code that uses the Safesock security policy.#These procedures use a callback interface to avoid using vwait, which#is not defined in the safe base.## See the file "license.terms" for information on usage and redistribution of# this file, and for a DISCLAIMER OF ALL WARRANTIES.package require Tcl 8.4# Keep this in sync with pkgIndex.tcl and with the install directories in# Makefilespackage provide http 2.7.12namespace eval http {    # Allow resourcing to not clobber existing data    variable http    if {![info exists http]} {array set http {    -accept */*    -proxyhost {}    -proxyport {}    -proxyfilter http::ProxyRequired    -urlencoding utf-8}set http(-useragent) "Tcl http client package [package provide http]"    }    proc init {} {# Set up the map for quoting chars. RFC3986 Section 2.3 say percent# encode all except: "... percent-encoded octets in the ranges of# ALPHA (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period# (%2E), underscore (%5F), or tilde (%7E) should not be created by URI# producers ..."for {set i 0} {$i <= 256} {incr i} {    set c [format %c $i]    if {![string match {[-._~a-zA-Z0-9]} $c]} {set map($c) %[format %.2X $i]    }}# These are handled speciallyset map(\n) %0D%0Avariable formMap [array get map]# Create a map for HTTP/1.1 open socketsvariable socketmapif {[info exists socketmap]} {    # Close but don't remove open sockets on re-init    foreach {url sock} [array get socketmap] {catch {close $sock}    }}array set socketmap {}    }    init    variable urlTypes    if {![info exists urlTypes]} {set urlTypes(http) [list 80 ::socket]    }    variable encodings [string tolower [encoding names]]    # This can be changed, but iso8859-1 is the RFC standard.    variable defaultCharset    if {![info exists defaultCharset]} {set defaultCharset "iso8859-1"    }    # Force RFC 3986 strictness in geturl url verification?    variable strict    if {![info exists strict]} {set strict 1    }    # Let user control default keepalive for compatibility    variable defaultKeepalive    if {![info exists defaultKeepalive]} {set defaultKeepalive 0    }    namespace export geturl config reset wait formatQuery register unregister    # Useful, but not exported: data size status code}# http::Log --##Debugging output -- define this to observe HTTP/1.1 socket usage.#Should echo any args received.## Arguments:#     msgMessage to output#proc http::Log {args} {}# http::register --##     See documentation for details.## Arguments:#     protoURL protocol prefix, e.g. https#     portDefault port for protocol#     commandCommand to use to create socket# Results:#     list of port and command that was registered.proc http::register {proto port command} {    variable urlTypes    set urlTypes($proto) [list $port $command]}# http::unregister --##     Unregisters URL protocol handler## Arguments:#     protoURL protocol prefix, e.g. https# Results:#     list of port and command that was unregistered.proc http::unregister {proto} {    variable urlTypes    if {![info exists urlTypes($proto)]} {return -code error "unsupported url type \"$proto\""    }    set old $urlTypes($proto)    unset urlTypes($proto)    return $old}# http::config --##See documentation for details.## Arguments:#argsOptions parsed by the procedure.# Results:#        TODOproc http::config {args} {    variable http    set options [lsort [array names http -*]]    set usage [join $options ", "]    if {[llength $args] == 0} {set result {}foreach name $options {    lappend result $name $http($name)}return $result    }    set options [string map {- ""} $options]    set pat ^-(?:[join $options |])$    if {[llength $args] == 1} {set flag [lindex $args 0]if {![regexp -- $pat $flag]} {    return -code error "Unknown option $flag, must be: $usage"}return $http($flag)    } else {foreach {flag value} $args {    if {![regexp -- $pat $flag]} {return -code error "Unknown option $flag, must be: $usage"    }    set http($flag) $value}    }}# http::Finish --##Clean up the socket and eval close time callbacks## Arguments:#token    Connection token.#errormsg    (optional) If set, forces status to error.#       skipCB      (optional) If set, don't call the -command callback. This#    is useful when geturl wants to throw an exception instead#    of calling the callback. That way, the same error isn't#    reported to two places.## Side Effects:#        Closes the socketproc http::Finish {token {errormsg ""} {skipCB 0}} {    variable $token    upvar 0 $token state    global errorInfo errorCode    if {$errormsg ne ""} {set state(error) [list $errormsg $errorInfo $errorCode]set state(status) "error"    }    if {($state(status) eq "timeout") || ($state(status) eq "error") ||([info exists state(connection)] && ($state(connection) eq "close"))    } then {        CloseSocket $state(sock) $token    }    if {[info exists state(after)]} {after cancel $state(after)    }    if {[info exists state(-command)] && !$skipCB    && ![info exists state(done-command-cb)]} {set state(done-command-cb) yesif {[catch {eval $state(-command) {$token}} err] && $errormsg eq ""} {    set state(error) [list $err $errorInfo $errorCode]    set state(status) error}    }}# http::CloseSocket -##Close a socket and remove it from the persistent sockets table.  If#possible an http token is included here but when we are called from a#fileevent on remote closure we need to find the correct entry - hence#the second section.proc ::http::CloseSocket {s {token {}}} {    variable socketmap    catch {fileevent $s readable {}}    set conn_id {}    if {$token ne ""} {        variable $token        upvar 0 $token state        if {[info exists state(socketinfo)]} {    set conn_id $state(socketinfo)        }    } else {        set map [array get socketmap]        set ndx [lsearch -exact $map $s]        if {$ndx != -1} {    incr ndx -1    set conn_id [lindex $map $ndx]        }    }    if {$conn_id eq {} || ![info exists socketmap($conn_id)]} {        Log "Closing socket $s (no connection info)"        if {[catch {close $s} err]} {    Log "Error: $err"}    } else {if {[info exists socketmap($conn_id)]} {    Log "Closing connection $conn_id (sock $socketmap($conn_id))"    if {[catch {close $socketmap($conn_id)} err]} {Log "Error: $err"    }    unset socketmap($conn_id)} else {    Log "Cannot close connection $conn_id - no socket in socket map"}    }}# http::reset --##See documentation for details.## Arguments:#tokenConnection token.#whyStatus info.## Side Effects:#       See Finishproc http::reset {token {why reset}} {    variable $token    upvar 0 $token state    set state(status) $why    catch {fileevent $state(sock) readable {}}    catch {fileevent $state(sock) writable {}}    Finish $token    if {[info exists state(error)]} {set errorlist $state(error)unset stateeval ::error $errorlist    }}# http::geturl --##Establishes a connection to a remote url via http.## Arguments:#       urlThe http URL to goget.#       argsOption value pairs. Valid options include:#-blocksize, -validate, -headers, -timeout# Results:#Returns a token for this connection. This token is the name of an#array that the caller should unset to garbage collect the state.proc http::geturl {url args} {    variable http    variable urlTypes    variable defaultCharset    variable defaultKeepalive    variable strict    # Initialize the state variable, an array. We'll return the name of this    # array as the token for the transaction.    if {![info exists http(uid)]} {set http(uid) 0    }    set token [namespace current]::[incr http(uid)]    variable $token    upvar 0 $token state    reset $token    # Process command options.    array set state {-binaryfalse-blocksize8192-queryblocksize 8192-validate0-headers{}-timeout0-typeapplication/x-www-form-urlencoded-queryprogress{}-protocol1.1binary0stateconnectingmeta{}coding{}currentsize0totalsize0querylength0queryoffset0typetext/htmlbody{}status""http""connectionclose    }    set state(-keepalive) $defaultKeepalive    set state(-strict) $strict    # These flags have their types verified [Bug 811170]    array set type {-binaryboolean-blocksizeinteger-queryblocksize integer-strictboolean-timeoutinteger-validateboolean    }    set state(charset)$defaultCharset    set options {-binary -blocksize -channel -command -handler -headers -keepalive-method -myaddr -progress -protocol -query -queryblocksize-querychannel -queryprogress -strict -timeout -type -validate    }    set usage [join [lsort $options] ", "]    set options [string map {- ""} $options]    set pat ^-(?:[join $options |])$    foreach {flag value} $args {if {[regexp -- $pat $flag]} {    # Validate numbers    if {[info exists type($flag)] &&![string is $type($flag) -strict $value]    } then {unset $tokenreturn -code error \    "Bad value for $flag ($value), must be $type($flag)"    }    set state($flag) $value} else {    unset $token    return -code error "Unknown option $flag, can be: $usage"}    }    # Make sure -query and -querychannel aren't both specified    set isQueryChannel [info exists state(-querychannel)]    set isQuery [info exists state(-query)]    if {$isQuery && $isQueryChannel} {unset $tokenreturn -code error "Can't combine -query and -querychannel options!"    }    # Validate URL, determine the server host and port, and check proxy case    # Recognize user:pass@host URLs also, although we do not do anything with    # that info yet.    # URLs have basically four parts.    # First, before the colon, is the protocol scheme (e.g. http)    # Second, for HTTP-like protocols, is the authority    #The authority is preceded by // and lasts up to (but not including)    #the following / or ? and it identifies up to four parts, of which    #only one, the host, is required (if an authority is present at all).    #All other parts of the authority (user name, password, port number)    #are optional.    # Third is the resource name, which is split into two parts at a ?    #The first part (from the single "/" up to "?") is the path, and the    #second part (from that "?" up to "#") is the query. *HOWEVER*, we do    #not need to separate them; we send the whole lot to the server.    #Both, path and query are allowed to be missing, including their    #delimiting character.    # Fourth is the fragment identifier, which is everything after the first    #"#" in the URL. The fragment identifier MUST NOT be sent to the server    #and indeed, we don't bother to validate it (it could be an error to    #pass it in here, but it's cheap to strip).    #    # An example of a URL that has all the parts:    #    #     http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes    #    # The "http" is the protocol, the user is "jschmoe", the password is    # "xyzzy", the host is "www.bogus.net", the port is "8000", the path is    # "/foo/bar.tml", the query is "q=foo", and the fragment is "changes".    #    # Note that the RE actually combines the user and password parts, as    # recommended in RFC 3986. Indeed, that RFC states that putting passwords    # in URLs is a Really Bad Idea, something with which I would agree utterly.    # Also note that we do not currently support IPv6 addresses.    #    # From a validation perspective, we need to ensure that the parts of the    # URL that are going to the server are correctly encoded.  This is only    # done if $state(-strict) is true (inherited from $::http::strict).    set URLmatcher {(?x)# this is _expanded_ syntax^(?: (\w+) : ) ?# <protocol scheme>(?: //    (?:(    [^@/\#?]+# <userinfo part of authority>) @    )?    ( [^/:\#?]+ )# <host part of authority>    (?: : (\d+) )?# <port part of authority>)?( [/\?] [^\#]*)?# <path> (including query)(?: \# (.*) )?# <fragment>$    }    # Phase one: parse    if {![regexp -- $URLmatcher $url -> proto user host port srvurl]} {unset $tokenreturn -code error "Unsupported URL: $url"    }    # Phase two: validate    if {$host eq ""} {# Caller has to provide a host name; we do not have a "default host"# that would enable us to handle relative URLs.unset $tokenreturn -code error "Missing host part: $url"# Note that we don't check the hostname for validity here; if it's# invalid, we'll simply fail to resolve it later on.    }    if {$port ne "" && $port > 65535} {unset $tokenreturn -code error "Invalid port number: $port"    }    # The user identification and resource identification parts of the URL can    # have encoded characters in them; take care!    if {$user ne ""} {# Check for validity according to RFC 3986, Appendix Aset validityRE {(?xi)    ^    (?: [-\w.~!$&'()*+,;=:] | %[0-9a-f][0-9a-f] )+    $}if {$state(-strict) && ![regexp -- $validityRE $user]} {    unset $token    # Provide a better error message in this error case    if {[regexp {(?i)%(?![0-9a-f][0-9a-f]).?.?} $user bad]} {return -code error \"Illegal encoding character usage \"$bad\" in URL user"    }    return -code error "Illegal characters in URL user"}    }    if {$srvurl ne ""} {# RFC 3986 allows empty paths (not even a /), but servers# return 400 if the path in the HTTP request doesn't start# with / , so add it here if needed.if {[string index $srvurl 0] ne "/"} {    set srvurl /$srvurl}# Check for validity according to RFC 3986, Appendix Aset validityRE {(?xi)    ^    # Path part (already must start with / character)    (?:      [-\w.~!$&'()*+,;=:@/]  | %[0-9a-f][0-9a-f] )*    # Query part (optional, permits ? characters)    (?: \? (?: [-\w.~!$&'()*+,;=:@/?] | %[0-9a-f][0-9a-f] )* )?    $}if {$state(-strict) && ![regexp -- $validityRE $srvurl]} {    unset $token    # Provide a better error message in this error case    if {[regexp {(?i)%(?![0-9a-f][0-9a-f])..} $srvurl bad]} {return -code error \    "Illegal encoding character usage \"$bad\" in URL path"    }    return -code error "Illegal characters in URL path"}    } else {set srvurl /    }    if {$proto eq ""} {set proto http    }    if {![info exists urlTypes($proto)]} {unset $tokenreturn -code error "Unsupported URL type \"$proto\""    }    set defport [lindex $urlTypes($proto) 0]    set defcmd [lindex $urlTypes($proto) 1]    if {$port eq ""} {set port $defport    }    if {![catch {$http(-proxyfilter) $host} proxy]} {set phost [lindex $proxy 0]set pport [lindex $proxy 1]    }    # OK, now reassemble into a full URL    set url ${proto}://    if {$user ne ""} {append url $userappend url @    }    append url $host    if {$port != $defport} {append url : $port    }    append url $srvurl    # Don't append the fragment!    set state(url) $url    # If a timeout is specified we set up the after event and arrange for an    # asynchronous socket connection.    set sockopts [list -async]    if {$state(-timeout) > 0} {set state(after) [after $state(-timeout) \[list http::reset $token timeout]]    }    # If we are using the proxy, we must pass in the full URL that includes    # the server name.    if {[info exists phost] && ($phost ne "")} {set srvurl $urlset targetAddr [list $phost $pport]    } else {set targetAddr [list $host $port]    }    # Proxy connections aren't shared among different hosts.    set state(socketinfo) $host:$port    # See if we are supposed to use a previously opened channel.    if {$state(-keepalive)} {variable socketmapif {[info exists socketmap($state(socketinfo))]} {    if {[catch {fconfigure $socketmap($state(socketinfo))}]} {Log "WARNING: socket for $state(socketinfo) was closed"unset socketmap($state(socketinfo))    } else {set sock $socketmap($state(socketinfo))Log "reusing socket $sock for $state(socketinfo)"catch {fileevent $sock writable {}}catch {fileevent $sock readable {}}    }}# don't automatically close this connection socketset state(connection) {}    }    if {![info exists sock]} {# Pass -myaddr directly to the socket commandif {[info exists state(-myaddr)]} {    lappend sockopts -myaddr $state(-myaddr)}        if {[catch {eval $defcmd $sockopts $targetAddr} sock]} {    # something went wrong while trying to establish the connection.    # Clean up after events and such, but DON'T call the command    # callback (if available) because we're going to throw an    # exception from here instead.    set state(sock) $sock    Finish $token "" 1    cleanup $token    return -code error $sock        }    }    set state(sock) $sock    Log "Using $sock for $state(socketinfo)" \        [expr {$state(-keepalive)?"keepalive":""}]    if {$state(-keepalive)} {        set socketmap($state(socketinfo)) $sock    }    if {![info exists phost]} {set phost ""    }    fileevent $sock writable [list http::Connect $token $proto $phost $srvurl]    # Wait for the connection to complete.    if {![info exists state(-command)]} {# geturl does EVERYTHING asynchronously, so if the user# calls it synchronously, we just do a wait here.http::wait $tokenif {![info exists state]} {    # If we timed out then Finish has been called and the users    # command callback may have cleaned up the token. If so we end up    # here with nothing left to do.    return $token} elseif {$state(status) eq "error"} {    # Something went wrong while trying to establish the connection.    # Clean up after events and such, but DON'T call the command    # callback (if available) because we're going to throw an    # exception from here instead.    set err [lindex $state(error) 0]    cleanup $token    return -code error $err}    }    return $token}proc http::Connected { token proto phost srvurl} {    variable http    variable urlTypes    variable $token    upvar 0 $token state    # Set back the variables needed here    set sock $state(sock)    set isQueryChannel [info exists state(-querychannel)]    set isQuery [info exists state(-query)]    set host [lindex [split $state(socketinfo) :] 0]    set port [lindex [split $state(socketinfo) :] 1]    set defport [lindex $urlTypes($proto) 0]    # Send data in cr-lf format, but accept any line terminators    fconfigure $sock -translation {auto crlf} -buffersize $state(-blocksize)    # The following is disallowed in safe interpreters, but the socket is    # already in non-blocking mode in that case.    catch {fconfigure $sock -blocking off}    set how GET    if {$isQuery} {set state(querylength) [string length $state(-query)]if {$state(querylength) > 0} {    set how POST    set contDone 0} else {    # There's no query data.    unset state(-query)    set isQuery 0}    } elseif {$state(-validate)} {set how HEAD    } elseif {$isQueryChannel} {set how POST# The query channel must be blocking for the async Write to# work properly.fconfigure $state(-querychannel) -blocking 1 -translation binaryset contDone 0    }    if {[info exists state(-method)] && $state(-method) ne ""} {set how $state(-method)    }    if {[catch {puts $sock "$how $srvurl HTTP/$state(-protocol)"puts $sock "Accept: $http(-accept)"array set hdrs $state(-headers)if {[info exists hdrs(Host)]} {    # Allow Host spoofing. [Bug 928154]    puts $sock "Host: $hdrs(Host)"} elseif {$port == $defport} {    # Don't add port in this case, to handle broken servers. [Bug    # #504508]    puts $sock "Host: $host"} else {    puts $sock "Host: $host:$port"}unset hdrsputs $sock "User-Agent: $http(-useragent)"        if {$state(-protocol) == 1.0 && $state(-keepalive)} {    puts $sock "Connection: keep-alive"        }        if {$state(-protocol) > 1.0 && !$state(-keepalive)} {    puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1        }        if {[info exists phost] && ($phost ne "") && $state(-keepalive)} {    puts $sock "Proxy-Connection: Keep-Alive"        }        set accept_encoding_seen 0set content_type_seen 0foreach {key value} $state(-headers) {    if {[string equal -nocase $key "host"]} {continue    }    if {[string equal -nocase $key "accept-encoding"]} {set accept_encoding_seen 1    }    if {[string equal -nocase $key "content-type"]} {set content_type_seen 1    }    set value [string map [list \n "" \r ""] $value]    set key [string trim $key]    if {[string equal -nocase $key "content-length"]} {set contDone 1set state(querylength) $value    }    if {[string length $key]} {puts $sock "$key: $value"    }}# Soft zlib dependency check - no package require        if {    !$accept_encoding_seen &&    ([package vsatisfies [package provide Tcl] 8.6]|| [llength [package provide zlib]]) &&    !([info exists state(-channel)] || [info exists state(-handler)])        } then {    puts $sock "Accept-Encoding: gzip, identity, *;q=0.1"        }if {$isQueryChannel && $state(querylength) == 0} {    # Try to determine size of data in channel. If we cannot seek, the    # surrounding catch will trap us    set start [tell $state(-querychannel)]    seek $state(-querychannel) 0 end    set state(querylength) \    [expr {[tell $state(-querychannel)] - $start}]    seek $state(-querychannel) $start}# Flush the request header and set up the fileevent that will either# push the POST data or read the response.## fileevent note:## It is possible to have both the read and write fileevents active at# this point. The only scenario it seems to affect is a server that# closes the connection without reading the POST data. (e.g., early# versions TclHttpd in various error cases). Depending on the# platform, the client may or may not be able to get the response from# the server because of the error it will get trying to write the post# data.  Having both fileevents active changes the timing and the# behavior, but no two platforms (among Solaris, Linux, and NT) behave# the same, and none behave all that well in any case. Servers should# always read their POST data if they expect the client to read their# response.if {$isQuery || $isQueryChannel} {    if {!$content_type_seen} {puts $sock "Content-Type: $state(-type)"    }    if {!$contDone} {puts $sock "Content-Length: $state(querylength)"    }    puts $sock ""    fconfigure $sock -translation {auto binary}    fileevent $sock writable [list http::Write $token]} else {    puts $sock ""    flush $sock    fileevent $sock readable [list http::Event $sock $token]}    } err]} then {# The socket probably was never connected, or the connection dropped# later.# if state(status) is error, it means someone's already called Finish# to do the above-described clean up.if {$state(status) ne "error"} {    Finish $token $err}    }}# Data access functions:# Data - the URL data# Status - the transaction status: ok, reset, eof, timeout# Code - the HTTP transaction code, e.g., 200# Size - the size of the URL dataproc http::data {token} {    variable $token    upvar 0 $token state    return $state(body)}proc http::status {token} {    if {![info exists $token]} {return "error"    }    variable $token    upvar 0 $token state    return $state(status)}proc http::code {token} {    variable $token    upvar 0 $token state    return $state(http)}proc http::ncode {token} {    variable $token    upvar 0 $token state    if {[regexp {[0-9]{3}} $state(http) numeric_code]} {return $numeric_code    } else {return $state(http)    }}proc http::size {token} {    variable $token    upvar 0 $token state    return $state(currentsize)}proc http::meta {token} {    variable $token    upvar 0 $token state    return $state(meta)}proc http::error {token} {    variable $token    upvar 0 $token state    if {[info exists state(error)]} {return $state(error)    }    return ""}# http::cleanup##Garbage collect the state associated with a transaction## Arguments#tokenThe token returned from http::geturl## Side Effects#unsets the state arrayproc http::cleanup {token} {    variable $token    upvar 0 $token state    if {[info exists state]} {unset state    }}# http::Connect##This callback is made when an asyncronous connection completes.## Arguments#tokenThe token returned from http::geturl## Side Effects#Sets the status of the connection, which unblocks# the waiting geturl callproc http::Connect {token proto phost srvurl} {    variable $token    upvar 0 $token state    set err "due to unexpected EOF"    if {[eof $state(sock)] ||[set err [fconfigure $state(sock) -error]] ne ""    } then {Finish $token "connect failed $err"    } else {fileevent $state(sock) writable {}::http::Connected $token $proto $phost $srvurl    }    return}# http::Write##Write POST query data to the socket## Arguments#tokenThe token for the connection## Side Effects#Write the socket and handle callbacks.proc http::Write {token} {    variable $token    upvar 0 $token state    set sock $state(sock)    # Output a block.  Tcl will buffer this if the socket blocks    set done 0    if {[catch {# Catch I/O errors on dead socketsif {[info exists state(-query)]} {    # Chop up large query strings so queryprogress callback can give    # smooth feedback.    puts -nonewline $sock \[string range $state(-query) $state(queryoffset) \     [expr {$state(queryoffset) + $state(-queryblocksize) - 1}]]    incr state(queryoffset) $state(-queryblocksize)    if {$state(queryoffset) >= $state(querylength)} {set state(queryoffset) $state(querylength)set done 1    }} else {    # Copy blocks from the query channel    set outStr [read $state(-querychannel) $state(-queryblocksize)]    puts -nonewline $sock $outStr    incr state(queryoffset) [string length $outStr]    if {[eof $state(-querychannel)]} {set done 1    }}    } err]} then {# Do not call Finish here, but instead let the read half of the socket# process whatever server reply there is to get.set state(posterror) $errset done 1    }    if {$done} {catch {flush $sock}fileevent $sock writable {}fileevent $sock readable [list http::Event $sock $token]    }    # Callback to the client after we've completely handled everything.    if {[string length $state(-queryprogress)]} {eval $state(-queryprogress) \    [list $token $state(querylength) $state(queryoffset)]    }}# http::Event##Handle input on the socket## Arguments#sockThe socket receiving input.#tokenThe token returned from http::geturl## Side Effects#Read the socket and handle callbacks.proc http::Event {sock token} {    variable $token    upvar 0 $token state    if {![info exists state]} {Log "Event $sock with invalid token '$token' - remote close?"if {![eof $sock]} {    if {[set d [read $sock]] ne ""} {Log "WARNING: additional data left on closed socket"    }}CloseSocket $sockreturn    }    if {$state(state) eq "connecting"} {if {[catch {gets $sock state(http)} n]} {    return [Finish $token $n]} elseif {$n >= 0} {    set state(state) "header"}    } elseif {$state(state) eq "header"} {if {[catch {gets $sock line} n]} {    return [Finish $token $n]} elseif {$n == 0} {    # We have now read all headers    # We ignore HTTP/1.1 100 Continue returns. RFC2616 sec 8.2.3    if {$state(http) == "" || ([regexp {^\S+\s(\d+)} $state(http) {} x] && $x == 100)} {return    }    set state(state) body    # If doing a HEAD, then we won't get any body    if {$state(-validate)} {Eof $tokenreturn    }    # For non-chunked transfer we may have no body - in this case we    # may get no further file event if the connection doesn't close    # and no more data is sent. We can tell and must finish up now -    # not later.    if {!(([info exists state(connection)]&& ($state(connection) eq "close"))    || [info exists state(transfer)])&& ($state(totalsize) == 0)    } then {Log "body size is 0 and no events likely - complete."Eof $tokenreturn    }    # We have to use binary translation to count bytes properly.    fconfigure $sock -translation binary    if {$state(-binary) || ![string match -nocase text* $state(type)]    } then {# Turn off conversions for non-text dataset state(binary) 1    }    if {$state(binary) || [string match *gzip* $state(coding)] ||[string match *compress* $state(coding)]    } then {if {[info exists state(-channel)]} {    fconfigure $state(-channel) -translation binary}    }    if {[info exists state(-channel)] &&![info exists state(-handler)]    } then {# Initiate a sequence of background fcopiesfileevent $sock readable {}CopyStart $sock $tokenreturn    }} elseif {$n > 0} {    # Process header lines    if {[regexp -nocase {^([^:]+):(.+)$} $line x key value]} {switch -- [string tolower $key] {    content-type {set state(type) [string trim [string tolower $value]]# grab the optional charset informationif {[regexp -nocase \ {charset\s*=\s*\"((?:[^""]|\\\")*)\"} \ $state(type) -> cs]} {    set state(charset) [string map {{\"} \"} $cs]} else {    regexp -nocase {charset\s*=\s*(\S+?);?} \$state(type) -> state(charset)}    }    content-length {set state(totalsize) [string trim $value]    }    content-encoding {set state(coding) [string trim $value]    }    transfer-encoding {set state(transfer) \    [string trim [string tolower $value]]    }    proxy-connection -    connection {set state(connection) \    [string trim [string tolower $value]]    }}lappend state(meta) $key [string trim $value]    }}    } else {# Now reading bodyif {[catch {    if {[info exists state(-handler)]} {set n [eval $state(-handler) [list $sock $token]]    } elseif {[info exists state(transfer_final)]} {set line [getTextLine $sock]set n [string length $line]if {$n > 0} {    Log "found $n bytes following final chunk"    append state(transfer_final) $line} else {    Log "final chunk part"    Eof $token}    } elseif {[info exists state(transfer)]&& $state(transfer) eq "chunked"    } then {set size 0set chunk [getTextLine $sock]set n [string length $chunk]if {[string trim $chunk] ne ""} {    scan $chunk %x size    if {$size != 0} {set bl [fconfigure $sock -blocking]fconfigure $sock -blocking 1set chunk [read $sock $size]fconfigure $sock -blocking $blset n [string length $chunk]if {$n >= 0} {    append state(body) $chunk}if {$size != [string length $chunk]} {    Log "WARNING: mis-sized chunk:\was [string length $chunk], should be $size"}getTextLine $sock    } else {set state(transfer_final) {}    }}    } else {#Log "read non-chunk $state(currentsize) of $state(totalsize)"set block [read $sock $state(-blocksize)]set n [string length $block]if {$n >= 0} {    append state(body) $block}    }    if {[info exists state]} {if {$n >= 0} {    incr state(currentsize) $n}# If Content-Length - check for end of data.if {    ($state(totalsize) > 0)    && ($state(currentsize) >= $state(totalsize))} then {    Eof $token}    }} err]} then {    return [Finish $token $err]} else {    if {[info exists state(-progress)]} {eval $state(-progress) \    [list $token $state(totalsize) $state(currentsize)]    }}    }    # catch as an Eof above may have closed the socket already    if {![catch {eof $sock} eof] && $eof} {if {[info exists $token]} {    set state(connection) close    Eof $token} else {    # open connection closed on a token that has been cleaned up.    CloseSocket $sock}return    }}# http::getTextLine --##Get one line with the stream in blocking crlf mode## Arguments#sockThe socket receiving input.## Results:#The line of text, without trailing newlineproc http::getTextLine {sock} {    set tr [fconfigure $sock -translation]    set bl [fconfigure $sock -blocking]    fconfigure $sock -translation crlf -blocking 1    set r [gets $sock]    fconfigure $sock -translation $tr -blocking $bl    return $r}# http::CopyStart##Error handling wrapper around fcopy## Arguments#sockThe socket to copy from#tokenThe token returned from http::geturl## Side Effects#This closes the connection upon errorproc http::CopyStart {sock token} {    variable $token    upvar 0 $token state    if {[catch {fcopy $sock $state(-channel) -size $state(-blocksize) -command \    [list http::CopyDone $token]    } err]} then {Finish $token $err    }}# http::CopyDone##fcopy completion callback## Arguments#tokenThe token returned from http::geturl#countThe amount transfered## Side Effects#Invokes callbacksproc http::CopyDone {token count {error {}}} {    variable $token    upvar 0 $token state    set sock $state(sock)    incr state(currentsize) $count    if {[info exists state(-progress)]} {eval $state(-progress) \    [list $token $state(totalsize) $state(currentsize)]    }    # At this point the token may have been reset    if {[string length $error]} {Finish $token $error    } elseif {[catch {eof $sock} iseof] || $iseof} {Eof $token    } else {CopyStart $sock $token    }}# http::Eof##Handle eof on the socket## Arguments#tokenThe token returned from http::geturl## Side Effects#Clean up the socketproc http::Eof {token {force 0}} {    variable $token    upvar 0 $token state    if {$state(state) eq "header"} {# Premature eofset state(status) eof    } else {set state(status) ok    }    if {($state(coding) eq "gzip") && [string length $state(body)] > 0} {        if {[catch {    if {[package vsatisfies [package present Tcl] 8.6]} {# The zlib integration into 8.6 includes proper gzip supportset state(body) [zlib gunzip $state(body)]    } else {set state(body) [Gunzip $state(body)]    }        } err]} then {    return [Finish $token $err]        }    }    if {!$state(binary)} {        # If we are getting text, set the incoming channel's encoding        # correctly.  iso8859-1 is the RFC default, but this could be any IANA        # charset.  However, we only know how to convert what we have        # encodings for.        set enc [CharsetToEncoding $state(charset)]        if {$enc ne "binary"} {    set state(body) [encoding convertfrom $enc $state(body)]        }        # Translate text line endings.        set state(body) [string map {\r\n \n \r \n} $state(body)]    }    Finish $token}# http::wait --##See documentation for details.## Arguments:#tokenConnection token.## Results:#        The status after the wait.proc http::wait {token} {    variable $token    upvar 0 $token state    if {![info exists state(status)] || $state(status) eq ""} {# We must wait on the original variable name, not the upvar aliasvwait ${token}(status)    }    return [status $token]}# http::formatQuery --##See documentation for details.  Call http::formatQuery with an even#number of arguments, where the first is a name, the second is a value,#the third is another name, and so on.## Arguments:#argsA list of name-value pairs.## Results:#TODOproc http::formatQuery {args} {    set result ""    set sep ""    foreach i $args {append result $sep [mapReply $i]if {$sep eq "="} {    set sep &} else {    set sep =}    }    return $result}# http::mapReply --##Do x-www-urlencoded character mapping## Arguments:#stringThe string the needs to be encoded## Results:#       The encoded stringproc http::mapReply {string} {    variable http    variable formMap    # The spec says: "non-alphanumeric characters are replaced by '%HH'". Use    # a pre-computed map and [string map] to do the conversion (much faster    # than [regsub]/[subst]). [Bug 1020491]    if {$http(-urlencoding) ne ""} {set string [encoding convertto $http(-urlencoding) $string]return [string map $formMap $string]    }    set converted [string map $formMap $string]    if {[string match "*\[\u0100-\uffff\]*" $converted]} {regexp {[\u0100-\uffff]} $converted badChar# Return this error message for maximum compatability... :^/return -code error \    "can't read \"formMap($badChar)\": no such element in array"    }    return $converted}# http::ProxyRequired --#Default proxy filter.## Arguments:#hostThe destination host## Results:#       The current proxy settingsproc http::ProxyRequired {host} {    variable http    if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} {if {    ![info exists http(-proxyport)] ||    ![string length $http(-proxyport)]} then {    set http(-proxyport) 8080}return [list $http(-proxyhost) $http(-proxyport)]    }}# http::CharsetToEncoding --##Tries to map a given IANA charset to a tcl encoding.  If no encoding#can be found, returns binary.#proc http::CharsetToEncoding {charset} {    variable encodings    set charset [string tolower $charset]    if {[regexp {iso-?8859-([0-9]+)} $charset -> num]} {set encoding "iso8859-$num"    } elseif {[regexp {iso-?2022-(jp|kr)} $charset -> ext]} {set encoding "iso2022-$ext"    } elseif {[regexp {shift[-_]?js} $charset]} {set encoding "shiftjis"    } elseif {[regexp {(?:windows|cp)-?([0-9]+)} $charset -> num]} {set encoding "cp$num"    } elseif {$charset eq "us-ascii"} {set encoding "ascii"    } elseif {[regexp {(?:iso-?)?lat(?:in)?-?([0-9]+)} $charset -> num]} {switch -- $num {    5 {set encoding "iso8859-9"}    1 - 2 - 3 {set encoding "iso8859-$num"    }}    } else {# other charset, like euc-xx, utf-8,...  may directly map to encodingset encoding $charset    }    set idx [lsearch -exact $encodings $encoding]    if {$idx >= 0} {return $encoding    } else {return "binary"    }}# http::Gunzip --##Decompress data transmitted using the gzip transfer coding.## FIX ME: redo using zlib sinflateproc http::Gunzip {data} {    binary scan $data Scb5icc magic method flags time xfl os    set pos 10    if {$magic != 0x1f8b} {        return -code error "invalid data: supplied data is not in gzip format"    }    if {$method != 8} {        return -code error "invalid compression method"    }    # lassign [split $flags ""] f_text f_crc f_extra f_name f_comment    foreach {f_text f_crc f_extra f_name f_comment} [split $flags ""] break    set extra ""    if {$f_extra} {binary scan $data @${pos}S xlen        incr pos 2        set extra [string range $data $pos $xlen]        set pos [incr xlen]    }    set name ""    if {$f_name} {        set ndx [string first \0 $data $pos]        set name [string range $data $pos $ndx]        set pos [incr ndx]    }    set comment ""    if {$f_comment} {        set ndx [string first \0 $data $pos]        set comment [string range $data $pos $ndx]        set pos [incr ndx]    }    set fcrc ""    if {$f_crc} {set fcrc [string range $data $pos [incr pos]]        incr pos    }    binary scan [string range $data end-7 end] ii crc size    set inflated [zlib inflate [string range $data $pos end-8]]    set chk [zlib crc32 $inflated]    if {($crc & 0xffffffff) != ($chk & 0xffffffff)} {return -code error "invalid data: checksum mismatch $crc != $chk"    }    return $inflated}# Local variables:# indent-tabs-mode: t# End:

Code:

ircd@server:/home/ircd# tclsh% package require tls1.6.7% package require http2.8.9% package require json1.3.3% package require htmlparse1.2.2%

Code:

me@shell:~$ tclsh% package require tls           1.6% package require http2.8.8% package require json 1.3.2% package require htmlparse1.2.1

Code:

./configure --with-tcllib=/usr/lib64/libtcl8.6.so --with-tclinc=/usr/include/tcl.h --enable-tls=/usr/include/tls.h

Code:

Operating System: Linux 4.9.15-x86_64-linode81IPv6 Support: yesTcl version: 8.6.6 (threaded)SSL/TLS Support: yes (OpenSSL 1.0.2g  1 Mar 2016)

Code:

################################################################################################  ## Advanced Google.tcl for eggdrop by CP1832 & Arnold_X-P network: DALnet irc.dal.net channel #tcls################################################################################################  ## To use this script you must set channel flag +google (ie .chanset #chan +google) ##  ################################################################################################## This tcl requires the following in eggdrop: http.tcl json.tcl #### This tcl requires the following in windrop: http.tcl json.tcl tls.tcl ##package require httppackage require jsonif {[catch {package require tls}]} {set httpsSupport false} else {set httpsSupport true}set url "www.googleapis.com/customsearch/v1?"if {$httpsSupport} {::http::register https 443 [list ::tls::socket -request 1 -require 0 -ssl3 1 -tls1 1]set url https://$url} else { set url http://$url }################################################################################################  ##                             Start Setup.                                         ##  ################################################################################################## Change the country code between the "" below to change the language of your results.     ##set googlectry "en"## Change the number between the "" below to change the number of results returned.         ##set googlemax "3"set googlelogo "12G4o7o12g3l4e"## google api ###you must create a key for your google search engine in https://cloud.google.com/docs/authentication/api-keys?visit_id=637728160970526198-325218571&rd=1 #creating_an_api_key# set API_KEY "your-api-key" set SEARCH_ID "your-id"################################################################################################  ##                           End Setup.                                              ## ################################################################################################set gaucho "CP1832 & Arnold_X-P"set googlever "v3.0.0"setudef flag googleproc googleweb {nick host hand chan type search} {      global googlectry googlemax API_KEY SEARCH_ID url googlelogo      if {![channel get $chan google]} {return}      if {$search == ""} {puthelp "PRIVMSG $chan :Error: <search> is empty"; return 1 }      if {$type == ""} {   set googleurl $url[::http::formatQuery alt json key $API_KEY cx $SEARCH_ID hl $googlectry q $search]   } else { set googleurl $url[::http::formatQuery alt json key $API_KEY cx $SEARCH_ID hl $googlectry q $search searchType $type] }      if {[catch {http::geturl $googleurl -timeout 5000} sockerr]} {         puthelp "privmsg $chan :$googlelogo Timeout connecting to Google: $sockerr"         return 1      } elseif {[http::ncode $sockerr] != 200 || ![string equal [http::status $sockerr] "ok"]} {         puthelp "privmsg $chan :$googlelogo Error querying Google: [http::ncode $sockerr] -> [http::status $sockerr]"         http::cleanup $sockerr         return 1      } else {         set data [http::data $sockerr]         http::cleanup $sockerr         set json [ ::json::json2dict $data ]         for { set i 0 } { $i < $googlemax } { incr i } {            set title ""            set link ""            catch { set title [ dict get [ lindex [ dict get $json items ] $i ] title ] }            catch { set link  [ dict get [ lindex [ dict get $json items ] $i ] link ] }            set index [ expr $i + 1 ]            if {[string length $title] && [string length $link]} {               putserv "PRIVMSG $chan :$googlelogo $title $link"            } else {               puthelp "PRIVMSG $chan :$googlelogo found no results"            }         }      }return 1}proc google {nick host hand chan text} { googleweb $nick $host $hand $chan "" $text}proc gimage {nick host hand chan text} { googleweb $nick $host $hand $chan image $text}foreach bind [binds google] {lassign $bind type flags mask num proc; unbind $type $flags $mask $proc}foreach bind [binds gimage] {lassign $bind type flags mask num proc; unbind $type $flags $mask $proc}bind pub - .google googlebind pub - !google googleputlog "Google search loaded by $gaucho $googlever" 

Code:

(2016-07-01 16:52:04) CP1832: .google mcgyver eggdrop(2016-07-01 16:52:06) Eggdrop: How to Build an Egg Drop Container with Straws | Egg Drop, Straws ... https://www.pinterest.com/pin/484066659919400998/(2016-07-01 16:56:19) CP1832: .google stone roses this is the one(2016-07-01 16:56:21) Eggdrop: The Stone Roses - This Is The One - YouTube https://www.youtube.com/watch?v=-aqY-8cMVdg

Code:

(2016-07-01 16:50:20) CP1832: .google mirc(2016-07-01 16:50:22) Eggdrop: Error querying Google: 400 -> ok