Code:

# cat /etc/rc.local #!/bin/sh## This script will be executed *after* all the other init scripts.# You can put your own initialization stuff in here if you don't# want to do the full Sys V style init stuff./eggdrop/eggdrop

Code:

#! /bin/sh## botchk## $Id: botchk,v 1.6 2002/02/27 18:21:46 guppy Exp $## This is a script suitable for use in a crontab.  It checks to make sure# your bot is running.  YOU NEED A SEPARATE CRON JOB FOR EACH BOT.  If your# bot isn't found, it'll try to start it back up.## You'll need to edit this script for your bot.## To check for your bot every 10 minutes, put the following line in your# crontab:#    0,10,20,30,40,50 * * * *   /home/mydir/mybot/botchk# And if you don't want to get email from crontab when it checks you bot,# put the following in your crontab:#    0,10,20,30,40,50 * * * *   /home/mydir/mybot/botchk >/dev/null 2>&1## change this to the directory you run your bot from (capitalization COUNTS):botdir="/home/mydir/mybot"# change this to the name of your bot's config file (capitalization COUNTS):botscript="mybot"# change this to the botnet-nick of your bot (capitalization COUNTS):botname="LamestBot"# change this to the name of your bot's userfile (capitalization COUNTS):userfile="LamestBot.user"# change this to the name of your bot's pidfile (capitalization COUNTS):pidfile="pid.LamestBot"########## you probably don't need to change anything below here ##########cd $botdir# is there a pid file?if test -r $pidfilethen  # there is a pid file -- is it current?  botpid=`cat $pidfile`  if `kill -CHLD $botpid >/dev/null 2>&1`  then    # it's still going -- back out quietly    exit 0  fi  echo ""  echo "Stale $pidfile file, erasing..."  rm -f $pidfilefiif test -r CANTSTART.$botnamethen  if test -r $userfile || test -r $userfile~new || test -r $userfile~bak  then    echo ""    echo "Userfile found, removing check file 'CANTSTART.$botname'..."    rm -f CANTSTART.$botname  fifi# test if we have run botchk previously and didn't find a userfileif test ! -f CANTSTART.$botnamethen  echo ""  echo "Couldn't find bot '$botname' running, reloading..."  echo ""  # check for userfile and reload bot if found  if test -r $userfile  then    # It's there, load the bot    ./$botscript    exit 0  else    if test -r $userfile~new    then      # Bot f*@!ed up while saving the userfile last time.  Move it over.      echo "Userfile missing.  Using last saved userfile..."      mv -f $userfile~new $userfile      ./$botscript      exit 0    else      if test -r $userfile~bak      then        # Userfile is missing, use backup userfile.        echo "Userfile missing.  Using backup userfile..."        cp -f $userfile~bak $userfile        ./$botscript        exit 0      else        # Well, nothing to work with...        echo "No userfile.  Could not reload the bot..."        echo "no userfile" > CANTSTART.$botname        exit 1      fi    fi  fifiexit 0

Code:

#! /bin/sh# This trick is borrowed from Tothwolf's Wolfpack \# Check for working 'grep -E' before using 'egrep' \if echo a | (grep -E '(a|b)') >/dev/null 2>&1; \then \  egrep="grep -E"; \else \  egrep=egrep; \fi; \# Search for tclsh[0-9].[0-9] in each valid dir in PATH \for dir in $(echo $PATH | sed 's/:/ /g'); \do \  if test -d $dir; \  then \    files=$(/bin/ls $dir | $egrep '^tclsh[0-9]\.[0-9]$'); \    if test "$files" != ""; \    then \      versions="${versions:+$versions }$(echo $files | sed 's/tclsh//g')"; \    fi; \  fi; \done; \for ver in $versions; \do \  tmpver=$(echo $ver | sed 's/\.//g'); \  if test "$lasttmpver" != ""; \  then \    if test "$tmpver" -gt "$lasttmpver"; \    then \      lastver=$ver; \      lasttmpver=$tmpver; \    fi; \  else \    lastver=$ver; \    lasttmpver=$tmpver; \  fi; \done; \exec tclsh$lastver "$0" ${1+"$@"}## AutoBotchk - An eggdrop utility to autogenerate botchk/crontab entries## Copyright (C) 1999, 2000, 2001, 2002 Jeff Fisher (guppy@eggheads.org)## How to use# ----------##   Most people begin to use AutoBotchk by moving it from the script# directory to their Eggdrop directory -- this will save you from having to# use the -dir option.##   If you run AutoBotchk without any arguments, it will present you with# a list of valid ones. Most people run AutoBotchk by doing:##     ./autobotchk <config file>##   This will setup crontab to check every 10 minutes to see whether or not# your bot needs to be restarted and it will e-mail if a restart was# performed. A lot of people turn off crontab e-mail support; however, I do# not recommend this since you will be unable to see any errors that might# happen.## Updates# -------#   27Sep2001: added new pidfile setting#   14Nov2001: removed old autobotchk update entries and updated the help#              section a little bit. also made autobotchk move down one#              directory if being run from the scripts directory.#   15Apr2003: cleaned up a few things, fixed a few bugs, and made a little#              love! j/k## $Id: autobotchk,v 1.12 2008/06/18 10:12:22 tothwolf Exp $#if {$argc == 0} {  puts "\nusage: $argv0 <eggdrop config> \[options\]"  puts " -dir     (directory to run autobotchk in)"  puts " -noemail (discard crontab e-mails)"  puts " -5       (5 minute checks)"  puts " -10      (10 minute checks)"  puts " -15      (15 minute checks)"  puts " -30      (30 minute checks)"  puts ""  exit}fconfigure stdout -buffering noneproc newsplit {text {split " "}} {  upvar $text ours  append ours $split  set index [string first $split $ours]  if {$index == -1} {    set ours ""    return ""  }  set tmp [string trim [string range $ours 0 $index]]  set ours [string trim [string range $ours [expr $index + [string length $split]] end]]  return $tmp}puts "\nautobotchk 1.10, (C) 2003 Jeff Fisher (guppy@eggheads.org)"puts "------------------------------------------------------------\n"set config [newsplit argv]set dir [pwd]set delay 10set email 1# If you renamed your eggdrop binary, you should change this variableset binary "eggdrop"while {[set opt [newsplit argv]] != ""} {  switch -- $opt {   "-time" -   "-1" { set delay 1 }   "-5" { set delay 5 }   "-10" { set delay 10 }    "-15" { set delay 15 }   "-20" { set delay 20 }   "-30" { set delay 30 }   "-nomail" -   "-noemail" {set email 0}   "-dir" {      set dir [newsplit argv]      if {[string match -* $dir]} {        puts "*** ERROR: you did not supply a directory name"        puts ""        exit      }      if {![file isdirectory $dir]} {        puts "*** ERROR: the directory you supplied is not a directory"        puts ""        exit      }    }  }}switch -- $delay {  "30" { set minutes "0,30" }  "20" { set minutes "0,20,40" }  "15" { set minutes "0,15,30,45" }  "5" { set minutes "0,5,10,15,20,25,30,35,40,45,50,55" }  "1" { set minutes "*" }  default { set minutes "0,10,20,30,40,50" }}if {[string match "*/scripts" $dir]} {  set dir [string range $dir 0 [expr [string length $dir] - 8]]}set dir [string trimright $dir /]if {![file exists $dir/help] || ![file isdirectory $dir/help]} {  puts "*** ERROR: are you sure you are running from a bot directory?"  puts ""  exit} elseif {![file exists $dir/$binary]} {  puts "*** ERROR: are you sure you are running from a bot directory?"  puts ""  exit}puts -nonewline "Opening '$config' for processing ... "if {[catch {open $dir/$config r} fd]} {  puts "error:"  puts "  $fd\n"  exit} else {  puts "done"}set count 0puts -nonewline "Scanning the config file "while {![eof $fd]} {  incr count  if {$count == 100} {    puts -nonewline "."    set count 0  }  set line [gets $fd]  if {[set blarg [newsplit line]] != "set"} {    continue  }  switch -- [set opt [newsplit line]] {    "pidfile" -    "nick" -    "userfile" -    "botnet-nick" {      set $opt [string trim [newsplit line] " \""]    }  }}close $fdif {$count != 0} {  puts -nonewline "."}puts " done" if {![info exists {botnet-nick}] && [info exists nick]} {  puts "  Defaulting \$botnet-nick to \"$nick\""  set botnet-nick $nick } if {![info exists pidfile]} {  puts "  Defaulting \$pidfile to \"pid.${botnet-nick}\""  set pidfile "pid.${botnet-nick}" } if {![info exists {botnet-nick}] || ![info exists userfile]} {  puts "  *** ERROR: could not find either \$userfile or \$botnet-nick"  puts ""  puts "  Are you sure this is a valid eggdrop config file?"  puts ""  exit } if {[catch {open $dir/${botnet-nick}.botchk w} fd]} {  puts "  *** ERROR: unable to open '${botnet-nick}.botchk' for writing"  puts ""  exit } puts $fd "#! /bin/sh## ${botnet-nick}.botchk (generated on [clock format [clock seconds] -format "%B %d, %Y @ %I:%M%p"])## Generated by AutoBotchk 1.10# Copyright (C) 1999, 2000, 2001, 2002, 2003 Jeff Fisher <guppy@eggheads.org>## change this to the directory you run your bot from:botdir=\"$dir\"# change this to the name of your bot's script in that directory:botscript=\"$binary $config\"# change this to the nickname of your bot (capitalization COUNTS)botname=\"${botnet-nick}\"# change this to the name of your bot's userfile (capitalization COUNTS)userfile=\"$userfile\"# change this to the name of your bot's pidfile (capitalization COUNTS)pidfile=\"$pidfile\"########## you probably don't need to change anything below here ##########cd \$botdir# is there a pid file?if test -r \$pidfilethen  # there is a pid file -- is it current?  botpid=`cat \$pidfile`  if `kill -CHLD \$botpid >/dev/null 2>&1`  then    # it's still going -- back out quietly    exit 0  fi  echo \"\"  echo \"Stale \$pidfile file, erasing...\"  rm -f \$pidfilefiif test -r CANTSTART.\$botnamethen  if test -r \$userfile || test -r \$userfile~new || test -r \$userfile~bak  then    echo \"\"    echo \"Userfile found, removing check file 'CANTSTART.\$botname'...\"    rm -f CANTSTART.\$botname  fifi# test if we have run botchk previously and didn't find a userfileif test ! -f CANTSTART.\$botnamethen  echo \"\"  echo \"Couldn't find bot '\$botname' running, reloading...\"  echo \"\"  # check for userfile and reload bot if found  if test -r \$userfile  then    # It's there, load the bot    ./\$botscript    exit 0  else    if test -r \$userfile~new    then      # Bot f*@!ed up while saving the userfile last time.  Move it over.      echo \"Userfile missing.  Using last saved userfile...\"      mv -f \$userfile~new \$userfile      ./\$botscript      exit 0    else      if test -r \$userfile~bak      then        # Userfile is missing, use backup userfile.        echo \"Userfile missing.  Using backup userfile...\"        cp -f \$userfile~bak \$userfile        ./\$botscript        exit 0      else        # Well, nothing to work with...        echo \"No userfile.  Could not reload the bot...\"        echo \"no userfile\" > CANTSTART.\$botname        exit 1      fi    fi  fifiexit 0 " close $fd puts "Wrote '${botnet-nick}.botchk' successfully ([file size $dir/${botnet-nick}.botchk] bytes)" if {[catch {exec chmod u+x $dir/${botnet-nick}.botchk} 0]} {  puts "  *** ERROR: unable to 'chmod u+x' the output file"  puts ""  exit } puts -nonewline "Scanning crontab entries ... " set tmp ".autobotchk[clock clicks].[pid]"if {$email} {  set line "$minutes \* \* \* \* $dir/${botnet-nick}.botchk"} {  set line "$minutes \* \* \* \* $dir/${botnet-nick}.botchk >\/dev\/null 2>&1"}if {[catch {exec crontab -l > $tmp} error ]} {  if {![string match "*no*cron*" [string tolower $error]] &&      ![string match "*can't open*" [string tolower $error]]} {    catch {file delete -force $tmp} 0    puts "error: unable to get crontab listing"    puts ""    puts $error    puts ""    exit  }}set fd [open $tmp r]while {![eof $fd]} {  set z [gets $fd]  if {[string match "*$dir/${botnet-nick}.botchk*" $z] ||      [string match "*$dir//${botnet-nick}.botchk*" $z]} {    puts "found an existing entry, we're done now"    puts ""    exit  }}close $fdputs "done"puts -nonewline "Adding the new crontab entry ... "set fd [open $tmp a]puts $fd $lineclose $fdif {[catch {exec crontab $tmp} error]} {  puts "error: unable to do 'crontab $tmp'"  puts ""  puts $error  puts ""  exit} else {  catch {file delete -force $tmp} 0}puts "done"puts ""puts "Use 'crontab -l' to view all your current crontab entries"puts "    'crontab -r' to remove all your crontab entries"puts ""