egghelp/eggheads community

[SOLVED]I'm not on #Channelname right now!

2011-03-22T14:49:07-04:00

Thanks Thanks Thanks. That solved the problem (hopefully for ever ).
Thank you all for your help.

Statistics: Posted by Kukuschi — Tue Mar 22, 2011 2:49 pm

[SOLVED]I'm not on #Channelname right now!

2011-03-22T14:36:27-04:00

I would rather try with 4. That's a lot of channel modes.. As for replacing the name of the network with * you forgot one place, no problem what so ever with it anyway.

Statistics: Posted by caesar — Tue Mar 22, 2011 2:36 pm

[SOLVED]I'm not on #Channelname right now!

2011-03-22T14:38:30-04:00

I am using eggdrop v1.6.20, no patches.
IRCd is as far as i know Unreal3.2.8.1 (is it what you meant?).

Here are some more info, i do not know if this helps.

Code:

-irc.****.com Unreal3.2.8.1 iowghraAsORTVSxNCWqBzvdHtGp lvhopsmntikrRcaqOALQbSeIKVfMCuzNTGj-CMDS=KNOCK,MAP,DCCALLOW,USERIP UHNAMES NAMESX SAFELIST HCN MAXCHANNELS=30 CHANLIMIT=#:30 MAXLIST=b:60,e:60,I:60 NICKLEN=30 CHANNELLEN=32 TOPICLEN=307 KICKLEN=307 AWAYLEN=307 are supported by this serverMAXTARGETS=20 WALLCHOPS WATCH=128 WATCHOPTS=A SILENCE=15 MODES=12 CHANTYPES=# PREFIX=(ohv)@%+ CHANMODES=beIqa,kfL,lj,psmntirRcOAQKVCuzNSMTG NETWORK=****.com CASEMAPPING=ascii EXTBAN=~,cqnr ELIST=MNUCT are supported by this serverSTATUSMSG=@%+ EXCEPTS INVEX are supported by this server

(i use **** because i do not know if it is ok to mention the server. I think it is, but better safe than sorry.

I have this setting in my config:

Code:

# What is your network?#   0 = EFnet#   1 = IRCnet#   2 = Undernet#   3 = DALnet#   4 = +e/+I/max-modes 20 Hybrid#   5 = Othersset net-type 1

Should i change it (to 5?)?

Statistics: Posted by Kukuschi — Tue Mar 22, 2011 2:06 pm

[SOLVED]I'm not on #Channelname right now!

2011-03-22T13:03:06-04:00

What eggdrop version are you using? (any patches applyed)
The IRCd net-type, and IRCd version would help as well.

Statistics: Posted by TCL_no_TK — Tue Mar 22, 2011 1:03 pm

[SOLVED]I'm not on #Channelname right now!

2011-03-21T06:16:51-04:00

No "non standart op-like channel prefixes" where i am. Just @.
It is really annoying.

@b2z
When did you problem appear? From the beginnig?
Mine started after bot became channel-owner.

----

On start it gets the following:
* ChanServ sets mode: +oq Botnick Botnick
while q means, afaik, that only service admines could kick the bot.
Can it have something to do with this? I do not think so because the problem remains even after dropping the channel (the bot is not longer channel owner).

Statistics: Posted by Kukuschi — Mon Mar 21, 2011 6:16 am

[SOLVED]I'm not on #Channelname right now!

2011-03-19T19:36:21-04:00

Code:

# Some IRC servers are using some non-standard op-like channel prefixes/modes.# Define them here so the bot can recognize them. Just "@" should be fine for# most networks. Un-comment the second line for some UnrealIRCds.set opchars "@"#set opchars "@&~"

double check these are correct with the IRC Network's IRCd. And also the net-type settings.

Statistics: Posted by TCL_no_TK — Sat Mar 19, 2011 7:36 pm

[SOLVED]I'm not on #Channelname right now!

2011-03-19T17:06:22-04:00

I have the same problem. I posted about it some months ago, but no answer

Statistics: Posted by b2z — Sat Mar 19, 2011 5:06 pm

[SOLVED]I'm not on #Channelname right now!

2011-03-22T14:57:16-04:00

Hello,
first: sorry for my bad english

Today i let my Eggdrop register its nickname with nickserv und made him the channel owner of my two channels via chanserv. I also added the line:

Code:

putserv "PRIVMSG nickserv :identify password"

here:

Code:

proc evnt:init_server {type} {  global botnick  putquick "MODE $botnick +i-ws"  putserv "PRIVMSG nickserv :identify password"}

to my config (while password is the password) then i restarted my Eggdrop with .restart in partyline. It connected to the Server right, identified itself without a problem, joined the right channels and was opped by chanserv. So far so good. Then i wanted to get opped via partyline (.op nickname #channel) the bot answers with: I'm not on #channel right now! (while channel is the right channel) but the bot is in this channel and is channel owner and has op ... and i am in the channel, too.

/msg Botname op password

leads to the following message in the partyline:

(Nick!Nick@*****.**) !Nick! OP

while Nick is my nick and the stars are the right host. But i get no op in the channels.

I restartetd the bot, let him leave the channels und rejoin, let him die and restarted him via shell, killed the process in the shell and restarted it via shell. Deleted the nickserv identify line from the config and identified it by hand ... nothing changed the problem. I have no mor ideas what to do (i am a very beginner with eggdrop).

I hope somebody can help me, this is annoying.

( I am running eggdrop v1.6.20, on Linux 2.6.32-22-server. I have shell access but no root access).

Edit: The same with other operations like kick or ban and so on. I can only use the indirect way with chanserv ( .msg chanserv op #channel nick)

Statistics: Posted by Kukuschi — Thu Mar 17, 2011 12:39 pm