Code:

# $Id: autoreop.tcl, eggdrop-1.6.x 2004/5 awyeah@usa.net Exp $# Begin - Deop Protection, ChanServ Auto Reop Script v5.61.b (autoreop.tcl)#Script Version: 5.61.b#Built Date: November 2003, Last Updated: 25th June 2004#Copyright © 1999-2004 awyeah (awyeah@usa.net)#TCL script was designed to use with eggdrop v1.5.x or higher##########################################################################         ChanServ Auto Reop Script v5.61.b             ##                                                                       ##                                                                       ## Author: awyeah                                         25th June 2004 ## Email: awyeah@usa.net                            Build version 5.61.b ## Copyright © 2004 awyeah All Rights Reserved    http://www.awyeah.org/ ############################################################################# #######                        ## PURPOSE                        ## #########              ## This script serves the purpose to auto-reop an eggdrop bot when it ## is deoped by someone on a channel. (there are some condtions)      ##                        ## Basically this script is written for networks, which run a channel    ## maintainence service called 'ChanServ', like DALnet. Hence this      ## script can be only used on networks having ChanServ.##                        ## I've made this script because sometimes people deop my eggdrop bot on ## channels, like suppose when they perform a mass deop in a channel, or ## maybe the bot disconnects from the server like in a netsplit and does# # not regain channel op status, or something of the kind.##                        ############################################################################# ###########      ## DESCRIPTION                  ## #############                              ## This script reops the bot on all channels, if it is deoped by        ## any user on any channel it is on. It can be requested to work on ## specific, user defined channels and will not request auto reop from# # chanserv on the channels not mentioned in its working channel list.##                        ## This is a very effective script to keep your bot oped on all          ## channels or specific channels it has access on. However, if the bot ## is deleted from the ChanServ access list then obviously as you might## suspect it will not be able to regain op status on that channel.      ##                        ## This script has other functions and features other than simply to ## reop the eggdrop bot when it is deoped. It has different punishment ## levels, many exemptions features, functions such as logging the ## people who deop the bot and etc.#############################################################################                        ## ########      ## FEATURES                  ## ##########                        ## 1. This script has *3* settings of channels to work on.##    - It can work on user defined channels.##    - It can work on all matching channels the bot is deoped on.##    - It can work on all the channels the bot is monitoring.#### 2. This script will make the bot request chanserv network service for##    regaining ops back on channels, when it is deoped.#### 3. This script has user defined exempt flag settings, so users in##    bot file such as owners and masters would be exempted from this##    script and would be able to deop the bot. It also has exemption ##    settings for seperate nicks, idents, user hosts, ip addresses etc. #### 4. This script has different punishment options for the user who##    deoped the bot, such as deoping, kicking and banning the user etc.#### 5. There is a notification feature to the user who deoped the bot.##    Notifications can be sent in the form of private messages and##    private notices depending upon the owners choice.#### 6. Bot owners can log the data of the people who deop the bot through ##    the course of the day and store the info a text file which created ##    in the main eggdrop dir, which would include which channel the bot ##    was deoped on, the users host, address and his nick.#############################################################################                        ## #####      ## USAGE                  ## #######                        ## - Please unzip zipped file autoreop.zip file and place the tcl file ##   autoreop.tcl file in your eggdrops */scripts* folder along with ##   your other tcl scripts.##                        ## - Please add a link at the bottom of your eggdrop's .CONF file to     ##   the path of your autoreop.tcl, it would be something like this:     ##                        ##        source scripts/autoreop.tcl      ##                        ## - Save your bot's configuration file##                        ## - *RESTART* your eggdrop bot and start enjoing the script!##                        ###########################################################################                        ## #######      ## CONTACT                  ## #########                        ## - If you have any suggestions, comments, questions or if you want to  ##   report bugs, please feel free to email me at:      ##                        ##    awyeah@usa.net / awyeah@awyeah.org      ##                  ##                  ## - You can contact me on MSN Messenger, on my ID: awyeah@awyeah.org##                        ##                        ## - You can also catch me on IRC (The DALnet Network)            ##                        ##         /server irc.dal.net:6667, Nick: awyeah      ##                  ###########################################################################                  ## ########      ## VERSIONS                  ## ##############  v5.61.b - Added a new type of channel activation option. The bot ## (25/06/04) will only request for ops on channels it is deoped on by ##            this new function.##     - Added new exemption options for exempting specific nicks,##            user idents, ip addresses and user hosts.##          - There were two similar ban types in the banmask selector##            fixed those and replaced the similar one by a new one.##          - Fixed some errors in the punishment procedure.##     - Optimized most of the settings to give a faster output.####  v4.82.b - Added a switch for users to select channels for the script ## (16/06/04) to work on. Users can activate the script on their own ##            defined channels or activate the script on all the ##            channels the bot is monitoring.##     - Added punishment options for the user who deoped the bot. ## The punishment range can be from minimum to maximum ## depending upon the type of punishment selected.##     - Modified the user notification options to select between## private messages or private notices.      ##     - Added a choice to send user defined notifications##     - Added a deop user log function. Users who deop the bot ## willbe logged into a text file in the bots main *eggdrop*## directory along with their userhost, channel and info.##     - Added a small feature to choose whether the bot should try## to reop itself when it is deoped on a channel by ChanServ.####  v3.56.b - Removed the all channels support for the script.## (25/05/04) Added support for users to define their own channels.##            Users can now activate the script on specific channels ##            the bot is opped on. The bot would only request ops from## ChanServ on those channels which are mentioned in its ##            channel list.##     - Also added a notice command if the owner wishes the bot## to notice the nick who deoped the bot, with a msg## telling the user who deoped the bot not to deop it.####  v3.20.b - Initial release of script## (08/03/04)##                  ##                  ## Latest released verions of this script which are updated and modified ## from time to time can be found on:      ##                  ##         http://www.egghelp.org/  -  http://www.tclscript.com/##                  ###########################################################################                  ## #######      ## CREDITS                  ## ###########  - Thanks to all my friends who gave me the idea of creating this##    script as it has proven to be very useful.####  I hope you really appreciate the work I've done!######  ./awyeah##                  ############################################################################################################################### Start editing variables from here onwards! ######################################################----------------------------------------##    SETUP CHANNEL ACTIVATION OPTIONS    ##----------------------------------------##Set the type of channels (defined, all) you would like to enable for the bot.#USAGE: [1/2/3] (1=USER DEFINED CHANS, 2=MATCHING CHANS 3=ALL CHANS) (You can enable only one, not both!)#Use '1' for 'user defined channels'. (Will make the bot request for ops only on channels defined for it)#Use '2' for 'all matching channels'. (Will make the bot request for ops on any channel it is deoped on)#Use '3' for 'all the channels' the bot is on. (Will make the bot request for ops on all channels it is on)set deoptype "1"#Set this to the user defined channels if you have enabled deop protection for user defined#channels, if not then leave this empty/blank. (Set the channels on which this script would work on)#USAGE: set deopchans "#channel1 #channel2 #channel3 #mychannel #yourchannel"set deopchans "#mychannel"#--------------------------------------##    SETUP NETWORK CHANSERV OPTIONS    ##--------------------------------------##Set your ChanServ service nick here. This is not a case-senstivie setting.#USAGE: Set the nick of your networks channel service, for example 'ChanServ'.#(If your network uses ChanServ and is not DALnet, set this to only 'ChanServ' then)#(If your network is DALnet, then you do not need to edit this as, I have set this default for DALnet) set chanservices "chanserv@services.dal.net"### Recommended to keep this setting to '0' (OFF) if possible ####Set this is you want your bot to reop itself when it is deoped on a channel by ChanServ.#Mostly sometimes people use chanserv to deop other people on channels, because they might have #been just removed off the channel access lists. (I would recommend to *KEEP THIS SETTING OFF*)#USAGE: [0/1] (0=WILL NOT REOP IF DEOPED BY CHANSERV, 1=WILL REOP IF DEOPED BY CHANSERV)#If set to '0' the bot will *NOT* reop itself if it is deoped by chanserv#If set to '1' the bot will reop itself if it is deoped by chanserv (can cause services/mode floods)set noreop "0"#---------------------------------##    SETUP USER EXEMPT OPTIONS    ##---------------------------------#### IMPORTANT NOTE ####For all of the exemption settings below please *DO NOT* use wildcards#such as: (*, !, *!*, *@*, *!*@*, @*.host.com, *@127.0.0.* etc as they maybe risky)#(If you do not have any ident, userhost, or ip to enter then please leave the field "")### This is a compulsory setting ####Set the 'user flags' for bot owners, masters, ops and etc which will be exempted from this script and #would be able to deop the bot, which after that the bot will not reop itself again using this script.#(Try not to leave this field empty, atleast fill it with "n" to exempt the bot owner if possible)#Example: n=owner, m=master, o=op, v=voice, f=friend, b=bot etc#USAGE: "m", "n", "o", or "mnf", "bfv" etcset deopexemptflags "mnof|mnof"#Set this to the list of 'exempted nicks', which you would like the bot to ignore when checking for#users who deoped the bot. (If you do not have any 'nick' to exempt then, leave this as "")#USAGE: "nick1, bot3, user5, robot7"set deopexemptnicks "spamcheckerbot"#Set this to the list of exempted 'user idents' which you would like the bot to ignore when checking for #users who deoped the bot. (If you do not have any 'user ident' to exempt then, leave this as "")#(Whois example: awyeah is cooldude@loves.you.com ===> cooldude)#USAGE: "cooldude, myident, user, script, sweet"set deopexemptidents "a-user-ident"#Set this to the list of 'exempted domains' (user ip addresses) which you would like the bot to ignore when#when checking for users who deoped the bot. (If you do not have any 'ip addresses' to exempt then, leave this as "")#(Whois example: awyeah is cooldude@adsl-154-462.cable.myisp.com ===> cable.myisp.com)#USAGE: "cable.myisp.com, name.myuniversity.edu, mindspring.com, cpe.net.cable.rogers.com"set deopexempthosts "an-isp-name"#Set this to the list of 'user hosts' (user@host) which you would like the bot to ignore when checking for #users who deoped the bot. (If you do not have any 'user@host' to exempt then, please leave this as "")#USAGE: "rules@127.0.0.1, i@am.eleet.com, yeah@baby.yeah.net"set deopexemptuserhosts "i@love.you.com"#-------------------------------------##    SETUP USER PUNISHMENT OPTIONS    ##-------------------------------------##Set this if you want the bot to 'punish' the person who deoped your bot.#USAGE: [0/1/2/3/4/5] (0=OFF, 1=DEOP, 2=KICK, 3=KICK/BAN, 4=STICKY KICK/BAN, 5=GLOBAL KICK/BAN)#Use '0' if *DO NOT* want the bot to punish the user. (No punishment)#Use '1' if you want the bot to 'deop' that user in the channel. (Minimal punishment)#Use '2' if you want the bot to 'kick' that user from the channel. (Moderate punishment)#Use '3' if you want the bot to 'kick and ban' that user from the channel. (Extreme punishment)#Use '4' if you want the bot to 'kick ban' that user using a sticky ban from the bots ban list. (Maximum punishment)#Use '5' if you want the bot to 'kick ban' (blacklist) that user using the bots global ban list. (Not recommended)set deoppunish "0"#Set this to the kick message if you have enabled to punish the user and would want to kick or #or kick and ban the user from the channel. (This would be the kick message used to kick out the user)set punishmsg "0,1 Deop Protection Kick 12,0 - Please 2do not deop 12me, as I am a 2channel guardian bot 12on this 2channel 12and need to be 2opped at all times."#Set this to the ban time if you have selected to punish the user by kicking and banning the user.#Please set the ban time in minutes over here. (in minutes)set punishunban "10"#-----------------------------##    SETUP TYPE OF BANMASK    ##-----------------------------##Set this to the banmask type if you have selected to punish the user by the kick and ban method.#Types of banmasks# 1 - *!*@some.host.com# 2 - *!*@*.host.com# 3 - *!*ident@some.domain.com# 4 - *!*ident@*.host.com# 5 - *!*ident*@*.host.com# 6 - *!*ident*@some.host.com# 7 - nick*!*@*.host.com# 8 - *nick*!*@*.host.com# 9 - nick*!*@some.host.com# 10 - *nick*!*@some.host.com# 11 - nick!ident@some.host.com# 12 - nick!ident@*.host.com# 13 - *nick*!*ident@some.host.com# 14 - nick*!*ident*@some.host.com# 15 - *nick*!*ident*@some.host.com# 16 - nick!*ident*@some.host.com# 17 - nick*!*ident@*.host.com# 18 - nick*!*ident*@*.host.com# 19 - *nick*!*ident@*.host.com# 20 - *nick*!*ident*@*.host.comset deopbanmask "1"#---------------------------------------##    SETUP USER NOTIFICATION OPTIONS    ##---------------------------------------##Set this if you want the bot to give a notification warning to the user who deoped it, saying back not to #deop it in the future. (If that user may have deoped your bot, probobaly because of any bugs or errors detected #in the bot, then that person should contact you 'the owner' of the bot)#USAGE: [0/1] (0=OFF, 1=ON)set deopnotify "0"#Set your nick here, the owner of the bot. (This is used to notify the person who deoped your bot that, you #are the owner of this bot and that person should contact you if he has encountered any problem with the bot)#(Please do not leave this setting empty as it is compulsory. I recommend you fill this setting)set botownernick "deopernick"#Set this to the type of notification warning you would like the bot to notify the user with.#USAGE: [1/2] (1=PRIVATE MESSAGE, 2=PRIVATE NOTICE)#Use '1' if you want the bot to notify the user with a PRIVATE MESSAGE (/msg).#Use '2' if you want the bot to notify the user with a PRIVATE NOTICE (/notice).#(This will only work if you have enabled the user notification option)set notifytype "2"#Set the notice here which you wish the bot to send to the user who deoped it. (This will only work if you have #enabled the deop notification switch and have not set this setting as blank/empty)set noticeuser "Please *do not* deop me. For further assistance please contact my owner *$botownernick* regarding any problems, bugs, errors or malfunctions detected in my script."#-------------------------------##    SETUP DEOP USER LOGGING    ##-------------------------------##Set this if you want to enable recording (nick, host, info and chan) for the people who deop#the bot. (This will help you to check who deops your bot while you are offline)#USAGE: [0/1] (0=OFF, 1=ON)set deoplog "0"#Set this to the file name which will be used to record and store the users nick, info and data in.#(This file will be created in your main */eggdrop* dir, which has your other .conf, .user and .chan files)set deopfile "deoplog.dat"################################################################################## Don't edit anything else from this point onwards, even if you know tcl! ##################################################################################bind mode - "*-*o*" deop:protectionproc deop:protection {nick uhost hand chan mode target} { global botnick deoptype deopchans  if {($target == $botnick) && ($nick != $botnick)} {   if {($deoptype == 1) && ($deopchans != "") && ([string match "#*" $deopchans])} { deop:specific:chans $nick $uhost $hand $chan }   if {($deoptype == 2)} { deop:matching:chans $nick $uhost $hand $chan }   if {($deoptype == 3)} { deop:all:chans $nick $uhost $hand $chan }   if {(($deoptype != 1) && ($deoptype != 2) && ($deoptype != 3)) || ($deoptype == "0") || ($deoptype == "")} { return 0 }   }}proc deop:specific:chans {nick uhost hand chan} { global botnick deopchans chanservices noreop deopexemptflags deopexemptnicks deopexemptidents deopexempthosts deopexemptuserhosts  if {([matchattr $hand $deopexemptflags $chan])} { return 0 }  if {($noreop == 0) && ([string equal -nocase $nick "chanserv"])} { return 0 }  set userident [lindex [split $uhost "@"] 0]; set ipaddress [lindex [split $uhost "@"] 1]  if {([string match -nocase *$deopexemptnicks* $nick]) || ([string match -nocase *$deopexemptidents* $userident]) || ([string match -nocase *$deopexempthosts* $ipaddress]) || ([string match -nocase *$deopexemptuserhosts* $uhost])} { return 0 }  if {(([lsearch -exact [split [string tolower $deopchans]] [string tolower $chan]] == -1) || ($deopchans == "*"))} { return 0 }   putserv "PRIVMSG $chanservices :OP $chan $botnick"   putlog "AUTO REOP: Deoped on $chan by $nick"   putlog "AUTO REOP: Catched OP NOTICE for $chan from $chanservices."   putlog "AUTO REOP: Reopping $botnick on $chan ."  utimer 2 [list deop:punish $nick $uhost $chan]  deop:record $nick $uhost $chan; deop:notify $nick $chan}proc deop:matching:chans {nick uhost hand chan} { global botnick chanservices noreop deopexemptflags deopexemptnicks deopexemptidents deopexempthosts deopexemptuserhosts  if {([matchattr $hand $deopexemptflags $chan])} { return 0 }  if {($noreop == 0) && ([string equal -nocase $nick "chanserv"])} { return 0 }  set userident [lindex [split $uhost "@"] 0]; set ipaddress [lindex [split $uhost "@"] 1]  if {([string match -nocase *$deopexemptnicks* $nick]) || ([string match -nocase *$deopexemptidents* $userident]) || ([string match -nocase *$deopexempthosts* $ipaddress]) || ([string match -nocase *$deopexemptuserhosts* $uhost])} { return 0 }   putserv "PRIVMSG $chanservices :OP $chan $botnick"   putlog "AUTO REOP: Deoped on $chan by $nick"   putlog "AUTO REOP: Catched OP NOTICE for $chan from $chanservices."   putlog "AUTO REOP: Reopping $botnick on $chan ."  utimer 2 [list deop:punish $nick $uhost $chan]  deop:record $nick $uhost $chan; deop:notify $nick $chan}proc deop:all:chans {nick uhost hand chan} { global botnick chanservices noreop deopexemptflags deopexemptnicks deopexemptidents deopexempthosts deopexemptuserhosts  if {([matchattr $hand $deopexemptflags $chan])} { return 0 }  if {($noreop == 0) && ([string equal -nocase $nick "chanserv"])} { return 0 }  set userident [lindex [split $uhost "@"] 0]; set ipaddress [lindex [split $uhost "@"] 1]  if {([string match -nocase *$deopexemptnicks* $nick]) || ([string match -nocase *$deopexemptidents* $userident]) || ([string match -nocase *$deopexempthosts* $ipaddress]) || ([string match -nocase *$deopexemptuserhosts* $uhost])} { return 0 }   foreach channel [channels] {    putserv "PRIVMSG $chanservices :OP $channel $botnick"    }   putlog "AUTO REOP: Deoped on $chan by $nick"   putlog "AUTO REOP: Catched OP NOTICE for $chan from $chanservices."   putlog "AUTO REOP: Reopping $botnick on *all channels*."  utimer 2 [list deop:punish $nick $uhost $chan]  deop:record $nick $uhost $chan; deop:notify $nick $chan}proc deop:punish {nick uhost chan} { global botnick deopbanmask deoppunish punishmsg punishunban  if {($deoppunish == 0)} { return 0 }  if {($deopbanmask == "")} { set banmask "*!*@[lindex [split $uhost @] 1]" }  if {($punishmsg == "")} { set punishmsg "0,1 Deop Protection Kick 12,0 - Please 2do not deop 12me, as I am a 2channel guardian bot 12on this 2channel 12and need to be 2opped at all times." }  if {($deoppunish == 1) && (![string equal -nocase $nick "chanserv"])} { putserv "MODE $chan -o $nick" }  if {($deoppunish == 2) && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { putserv "KICK $chan $nick :$punishmsg" }  if {($deoppunish == 3) && ($deopbanmask != "") && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { set banmask [deop:banmask $uhost $nick]; putserv "MODE $chan +b $banmask"; putserv "KICK $chan $nick :$punishmsg"; timer $punishunban "pushmode $chan +b $banmask" }  if {($deoppunish == 4) && ($deopbanmask != "") && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { set banmask [deop:banmask $uhost $nick]; newchanban $chan $banmask deopprot "$punishmsg" $punishunban }  if {($deoppunish == 5) && ($deopbanmask != "") && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { set banmask [deop:banmask $uhost $nick]; newban $banmask deopprot "$punishmsg" $punishunban }  return 1}if {![file exists $deopfile] && ($deoplog == 1)} { putlog "DEOP RECORD FILE: The \002deop user log file\002 does not exist. Creating file: \002$deopfile\002" set file [open $deopfile w] puts $file "DEOP RECORD DATABASE (ChanServ Auto Reop Script v5.61.b by awyeah)\n" catch {close $file}}proc deop:record {nick uhost chan} { global botnick deoplog deopfile spamrecord spamdata  if {($deoplog == "1")} {  if {![file exists $deopfile]} { set file [open $deopfile w]; puts $file "DEOP LOG DATABASE (ChanServ Auto Reop Script v5.61.b by awyeah)\n"; catch {close $file} }   set file [open $deopfile a+]; set time [unixtime]; set deoptime [ctime $time]   set date [string trim [lindex $deoptime 2]]; set month [string trim [lindex $deoptime 1]]; set time [string trim [lindex $deoptime 3]]   puts $file "\[$date $month $time\] «DEOPED ON [string toupper $chan]» $botnick deoped on $chan by: $nick ($uhost)"   close $file   return 1   }}proc deop:notify {nick chan} { global deopnotify notifytype noticeuser  if {($deopnotify == 1) && (($notifytype == 1) || ($notifytype == 2)) && ($noticeuser != "") && (![string equal -nocase $nick "chanserv"])} {  if {($notifytype == 1)} { set notify PRIVMSG }; if {($notifytype == 2)} { set notify NOTICE }   putserv "$notify $nick :$noticeuser"   return 0   }}proc deop:banmask {uhost nick} { global deopbanmask   switch -- $deopbanmask {    1 { set banmask "*!*@[lindex [split $uhost @] 1]" }    2 { set banmask "*!*@[lindex [split [maskhost $uhost] "@"] 1]" }    3 { set banmask "*!*$uhost" }    4 { set banmask "*!*[lindex [split [maskhost $uhost] "!"] 1]" }    5 { set banmask "*!*[lindex [split $uhost "@"] 0]*@[lindex [split [maskhost $uhost] "@"] 1]" }    6 { set banmask "*!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }    7 { set banmask "$nick*!*@[lindex [split [maskhost $uhost] "@"] 1]" }    8 { set banmask "*$nick*!*@[lindex [split [maskhost $uhost] "@"] 1]" }    9 { set banmask "$nick*!*@[lindex [split $uhost "@"] 1]" }    10 { set banmask "*$nick*!*@[lindex [split $uhost "@"] 1]" }    11 { set banmask "$nick*!*[lindex [split $uhost "@"] 0]@[lindex [split $uhost @] 1]" }    12 { set banmask "$nick*!*[lindex [split $uhost "@"] 0]@[lindex [split [maskhost $uhost] "@"] 1]" }    13 { set banmask "*$nick*!*$uhost" }    14 { set banmask "$nick*!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }    15 { set banmask "*$nick*!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }     16 { set banmask "$nick!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }     17 { set banmask "$nick![lindex [split $uhost "@"] 0]@[lindex [split [maskhost $uhost] "@"] 1]" }    18 { set banmask "$nick!*[lindex [split $uhost "@"] 0]*@[lindex [split [maskhost $uhost] "@"] 1]" }     19 { set banmask "*$nick*!*[lindex [split $uhost "@"] 0]@[lindex [split [maskhost $uhost] "@"] 1]" }    20 { set banmask "*$nick*!*[lindex [split $uhost "@"] 0]*@[lindex [split [maskhost $uhost] "@"] 1]" }     default { set banmask "*!*@[lindex [split $uhost @] 1]" }    return $banmask   }}putlog "\[LOADED\] ChanServ Auto Reop Script v5.61.b by \002awyeah (awyeah@usa.net)\002"if {($deoptype == 1)} { putlog "*ENABLED* Auto Reop for \002$nick\002 on: \002$deopchans\002" }if {($deoptype == 2)} { putlog "*ENABLED* Auto Reop for \002$nick\002 on: \002All deop matching channels\002" }if {($deoptype == 3)} { putlog "*ENABLED* Auto Reop for \002$nick\002 on: \002All channels\002" }if {(($deoptype != 1) && ($deoptype != 2) && ($deoptype != 3)) || ($deoptype == "0") || ($deoptype == "")} { putlog "*DISABLED* Auto Reop for \002$nick\002 because: \002No channel type has been seletected\002" }return