egghelp/eggheads community

my errors in cloneflood.tcl v4.24.b by awyeah

2009-12-01T03:01:11-04:00

Hey Awyeah,

I fixed all the error codes as mentioned in this post, still i am getting this error.

[09:55:55] [12:00] invalid command name "flyby:reset"
[09:56:16] [12:00] Tcl error in script for 'timer635683':
[09:56:17] [12:00] invalid command name "flyby:reset"

[12:04] Tcl error [clone:part:chan:type]: can't read "clone_banmask": no such variable

Can you help me in that.

Regards
Jade

Statistics: Posted by Jade — Tue Dec 01, 2009 3:01 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-24T11:19:15-04:00

I'm not sure what netset.tcl does, but anyway I'm pasting the modified slennox chanlimit.tcl in the scripts request section.

Here is the link to the thread:
http://forum.egghelp.org/viewtopic.php?p=74736#74736

Statistics: Posted by awyeah — Tue Jul 24, 2007 11:19 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-24T09:47:09-04:00

Thank you for clearing up the part/quit/left channel.

I would be very interested in the Channel limit tcl you modified. I tried to use the slennox one built into netbots but it dont work well for large high traffic channels.

I would also be interested in what type of netset.tcl settings are actually working in the large channels.

thanks again

brew

Statistics: Posted by BrewMaster — Tue Jul 24, 2007 9:47 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-24T01:46:38-04:00

The action:

(*) Part is used when a user leaves a channel.
(*) Quit is used when a user disconnects from the server.

*** Left is just another word for part; displayed when a user leaves a channel (displayed on the IRC client, namely mIRC)

Channel limit tcl? I never thought I made one, but I use a modified version of slennox's channel limit script. The timers in his script are only limited to being called in minutes, I changed mine to seconds, so its faster and better (especially for larger channels where you need to check in seconds) and also a bit of code improvement here and there.

Statistics: Posted by awyeah — Tue Jul 24, 2007 1:46 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-24T00:10:39-04:00

are quit, part, and left channel all the same action?

I thought quit, part and left channel where different in some way.

Thanks for all the help so far, looking forward to the new cloneflood script.

Have you redone your old channel limit tcl?

Statistics: Posted by BrewMaster — Tue Jul 24, 2007 12:10 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-23T06:00:32-04:00

That is simple. You just check the length of a part message or if it contains specific words, and then ban that user accordingly.

Example for this script which you can use, use just need to set the length of the text. If the length of the part message text is greater than or equal to 25 (text length does not include spaces), then that person will be banned.

Code:

set partmsglen "25"bind part - "*" ban:partmsgproc ban:partmsg {nick uhost hand chan text} { if {[isbotnick $nick] || ![botisop $chan]} { return 0 } set text [stripcodes bcruag $text]] if {[string length [string map {" " ""} [stripcodes bcruag $text]]] >= $::partmsglen} { if {[ischanban "*!*@[lindex [split $uhost @] 1]" $chan] || [wasop $nick $chan]} { return 0 }  putquick "MODE $chan +b-k *!*@[lindex [split $uhost @] 1] Unallowed.part.message" -next  }}

And I don't know what you mean here by raw numerics, but everyone who parts a channel will trigger the part bind, even the bot itself.

Statistics: Posted by awyeah — Mon Jul 23, 2007 6:00 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-23T04:36:04-04:00

One thing to consider if your making a new clone/flood script is not only join/part floods but "left" channel floods.

as in nickblahblah has left #somechannel (verry long left channel message)

I don't know the difference in server raw codes, but part and left channel are different in some way because the flood scripts are not catching this type of flood.

Statistics: Posted by BrewMaster — Mon Jul 23, 2007 4:36 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-23T04:31:18-04:00

thank you. I will make those changes.

Let me know when you have the new version. I would be happy to help you test it.

brew

Statistics: Posted by BrewMaster — Mon Jul 23, 2007 4:31 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-22T22:25:36-04:00

I forgot to mention this.

set clone_modelock_switch "0"

is set and I still had the errors.

Actually the error you pasted above, wasn't because of the modelock thing, but actually I forgot to declare a variable $clone_exempt_masks as global in the procedure clone:join:flood:check.

Replacing "$clone_exempt_masks" with "$::clone_exempt_masks" everywhere in the script would do the trick, or the solution I posted above as well.

Statistics: Posted by awyeah — Sun Jul 22, 2007 10:25 pm

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-22T22:21:19-04:00

Replace these lines in the script:

Code:

proc clone:join:flood:check {nick uhost hand type chan} { global clone_channels clone_modelock_switch clone_kick_type clone_kick_msg_type clone_exempt_hosts clone_channel_type clone_banmask_type global clone_exempt_hosts clone_exempt_flags clone_exempt_ops clone_exempt_voices clone_unresolved_ident clone_punishment_type clone_bantime

with these lines:

Code:

proc clone:join:flood:check {nick uhost hand type chan} { global clone_channels clone_channel_type clone_unresolved_ident clone_exempt_flags clone_exempt_nicks global clone_exempt_masks clone_modelock_switch clone_punishment_type clone_banmask_type clone_bantime

Indeed this script is a very messy one, hence I am working on a newer version of this script (testing it now a days), from scratch, which doesn't have so complicated features and is very accurate.

Statistics: Posted by awyeah — Sun Jul 22, 2007 10:21 pm

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-22T07:11:34-04:00

I forgot to mention this.

set clone_modelock_switch "0"

is set and I still had the errors.

Statistics: Posted by BrewMaster — Sun Jul 22, 2007 7:11 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-22T07:07:03-04:00

Still having problems with mode que. I am going to try disabling the user messaging like getadacul did and see if that fixes it. Anyway here is the info cut from the bot:

[05:23] lamer kicked from #zz by MyBot: Banned: Excessive clones, msg me to reenter channel.
[05:23] Warning: over maximum mode queue!
[05:23] Warning: over maximum mode queue!
[05:23] Tcl error [clone:join:flood:check]: can't read "clone_exempt_masks": no such variable
[05:23] JOIN flood from zzz! Banning.
[05:23] #zzz: mode change '+b *!*@zzz' by MyBot!~mybot@mybot.net
[05:23] Warning: over maximum mode queue!
[05:23] #zzz: mode change '+b zzzz by MyBot!~mybot@mybot.net

Type of flood encountered:
mass clones joining and then leaving
the flood was an "lameruser has left #zzz (verry long left msg to flood the channel)" type of flood.

Statistics: Posted by BrewMaster — Sun Jul 22, 2007 7:07 am

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-11T20:26:27-04:00

Replace these lines:

Code:

proc clone:join:flood:check {nick uhost hand type chan} { global clone_channels clone_modelock_switch clone_kick_type clone_kick_msg_type clone_exempt_hosts clone_channel_type clone_banmask_type global clone_exempt_hosts clone_exempt_flags clone_exempt_ops clone_exempt_voices clone_unresolved_ident clone_punishment_type clone_bantime

with these:

Code:

proc clone:join:flood:check {nick uhost hand type chan} { global clone_channels clone_modelock_switch clone_kick_type clone_kick_msg_type clone_exempt_hosts global clone_channel_type clone_banmask_type clone_exempt_hosts clone_exempt_flags clone_exempt_ops global clone_exempt_nicks clone_exempt_voices clone_unresolved_ident clone_punishment_type clone_bantime

It should be fine now. Bummer.. I didn't know it had so many errors.
Well if there is a further error with the modelock, let me know.

JD

Statistics: Posted by awyeah — Wed Jul 11, 2007 8:26 pm

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-11T12:36:24-04:00

awyeah,

all the previous errors are gone with that code update.
I am not sure if the modelock is gone yet because I have not had a large flood in a while.

There is a new error:

[12:20] Tcl error [clone:join:flood:check]: can't read "clone_exempt_nicks": no such variable

I do have a few nics set to exempt. Not sure if I really need this or not. I guess I could just turn that setting OFF.

Thanks

Statistics: Posted by BrewMaster — Wed Jul 11, 2007 12:36 pm

my errors in cloneflood.tcl v4.24.b by awyeah

2007-07-10T01:02:04-04:00

Thanks awyeah!

I made the code changes and rehashed. No errors so far.
I will let you all know if i get any errors in the next flood I encounter.

brew

Statistics: Posted by BrewMaster — Tue Jul 10, 2007 1:02 am